Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Iluminação de sala limpa e equipamentos elétricos
Z Socket Cleanroom à prova de explosão
A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.
- Mechanical Switch Interlock
- Robust Alloy Receptacle
- Color-Coded Pin Arrangement
- Flush Stainless Mounting Panel
Introdução do produto
This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.
Características-chave
The plug remains mechanically retained until the isolator returns to off.
Color and keying prevent connection of incompatible voltage configurations.
A hinged protective cap closes the receptacle when unused.
The stainless mounting panel separates the rugged device body from the room wall joint.
Preocupações do produto do cliente
Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.
A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.
Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.
The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.
Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.
Aplicações típicas
Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms
Parâmetros técnicos
Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.
| Material principal | Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate |
|---|---|
| Painel de espessura | 2.0-4.0 mm stainless sanitary mounting plate |
| Largura efetiva | 220-450 mm complete interlocked assembly width |
| Comprimento máximo | Up to 650 mm overall panel height |
| Aço enfrentando espessura | 2.0-3.0 mm SUS316L cleanroom-facing plate |
| Densidade Core | Approximately 2700 kg/m³ for copper-free aluminum receptacle housing |
| Condutividade térmica | 150-200 W/(m·K) for the aluminum housing |
| Superfície acabado | Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate |
| Tipo conjunto | Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry
Planning a Explosion-Proof Cleanroom Socket specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
