English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Освещение и электрическое оборудование в чистых помещениях
Взрывозащитная розетка для чистых помещений
A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.
- Mechanical Switch Interlock
- Robust Alloy Receptacle
- Color-Coded Pin Arrangement
- Flush Stainless Mounting Panel
Введение продукции
This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.
Основные характеристики
The plug remains mechanically retained until the isolator returns to off.
Color and keying prevent connection of incompatible voltage configurations.
A hinged protective cap closes the receptacle when unused.
The stainless mounting panel separates the rugged device body from the room wall joint.
Обеспокоенность клиентов продуктами
Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.
A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.
Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.
The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.
Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.
Типичные приложения
Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms
Технические параметры
Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.
| Основной материал | Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate |
|---|---|
| Толщина панели | 2.0-4.0 mm stainless sanitary mounting plate |
| эффективная ширина | 220-450 mm complete interlocked assembly width |
| Максимальная длина | Up to 650 mm overall panel height |
| Толщина линий стали | 2.0-3.0 mm SUS316L cleanroom-facing plate |
| Плотность ядра | Approximately 2700 kg/m³ for copper-free aluminum receptacle housing |
| Теплопроводимость | 150-200 W/(m·K) for the aluminum housing |
| Поверхностная отделка | Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate |
| Объединенный тип | Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry
Planning a Explosion-Proof Cleanroom Socket specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
