Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Z Socket de salle blanche à l'épreuve des explosions
A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.
- Mechanical Switch Interlock
- Robust Alloy Receptacle
- Color-Coded Pin Arrangement
- Flush Stainless Mounting Panel
Introduction de produit
This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.
Key Features
The plug remains mechanically retained until the isolator returns to off.
Color and keying prevent connection of incompatible voltage configurations.
A hinged protective cap closes the receptacle when unused.
The stainless mounting panel separates the rugged device body from the room wall joint.
Préoccupations du client produit
Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.
A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.
Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.
The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.
Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.
Les applications typiques
Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms
Paramètres techniques
Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.
| Matériaux de base | Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate |
|---|---|
| Panneau épaisseur | 2.0-4.0 mm stainless sanitary mounting plate |
| Largeur effective | 220-450 mm complete interlocked assembly width |
| Longueur maximale | Up to 650 mm overall panel height |
| Acier face épaisseur | 2.0-3.0 mm SUS316L cleanroom-facing plate |
| Densité Core | Approximately 2700 kg/m³ for copper-free aluminum receptacle housing |
| Conductivité thermique | 150-200 W/(m·K) for the aluminum housing |
| surface finie | Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate |
| Type joint | Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry
Planning a Explosion-Proof Cleanroom Socket specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
