Explosion-proof cleanroom socket with interlocked rotary switch on stainless plate

클린룸 조명 및 전기 장비

폭발 방지 클린룸 소켓

A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.

Mechanical Switch Interlock
Robust Alloy Receptacle
Color-Coded Pin Arrangement
Flush Stainless Mounting Panel

견적 요청 제품 찾아보기

상품 소개

This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.

주요 기능

The switch cannot close until the plug is correctly engaged.

The plug remains mechanically retained until the isolator returns to off.

Color and keying prevent connection of incompatible voltage configurations.

A hinged protective cap closes the receptacle when unused.

The stainless mounting panel separates the rugged device body from the room wall joint.

고객 제품 관심사

Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.

A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.

Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.

The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.

Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.

일반적인 응용 프로그램

Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms

기술 매개변수

Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.

핵심 재료	Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate
패널 두께	2.0-4.0 mm stainless sanitary mounting plate
유효 폭	220-450 mm complete interlocked assembly width
최대 길이	Up to 650 mm overall panel height
강철 면면 두께	2.0-3.0 mm SUS316L cleanroom-facing plate
코어 밀도	Approximately 2700 kg/m³ for copper-free aluminum receptacle housing
열전도도 (Thermal Conductivity)	150-200 W/(m·K) for the aluminum housing
표면 마무리	Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate
접합 유형	Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry

Planning a Explosion-Proof Cleanroom Socket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.