English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
مقبس غرف الأبحاث واقية من الانفجار
A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.
- Mechanical Switch Interlock
- Robust Alloy Receptacle
- Color-Coded Pin Arrangement
- Flush Stainless Mounting Panel
مقدمة المنتج
This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.
الخصائص الرئيسية
The plug remains mechanically retained until the isolator returns to off.
Color and keying prevent connection of incompatible voltage configurations.
A hinged protective cap closes the receptacle when unused.
The stainless mounting panel separates the rugged device body from the room wall joint.
مخاوف المنتج للعملاء
Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.
A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.
Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.
The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.
Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.
تطبيقات نموذجية
Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms
المعلمات الفنية
Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.
| المواد الأساسية | Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate |
|---|---|
| سمك اللوحة | 2.0-4.0 mm stainless sanitary mounting plate |
| العرض الفعال | 220-450 mm complete interlocked assembly width |
| الحد الأقصى الطول | Up to 650 mm overall panel height |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L cleanroom-facing plate |
| الكثافة الأساسية | Approximately 2700 kg/m³ for copper-free aluminum receptacle housing |
| الموصلية الحرارية | 150-200 W/(m·K) for the aluminum housing |
| إنهاء السطح | Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate |
| نوع المشترك | Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry
Planning a Explosion-Proof Cleanroom Socket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
