Complete enclosed powder containment booth with gasketed access doors

Fluxo laminar e equipamentos de contenção

Container de pó fechado

A fully enclosed negative-pressure booth that separates manual powder work from the surrounding room through gasketed access, monitored airflow and staged filtration.

Fully Enclosed Process Zone
Gasketed Access Doors
Monitored Negative Pressure
Contained Filter Change Options

Solicite um orçamento. Browse produtos

Introdução do produto

This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.

Características-chave

Sealed walls and doors establish a defined pressure boundary around the process.

Separated personnel and material openings can reduce crossing traffic.

External view panels permit supervision without opening the booth.

Staged filters retain airborne powder before air is recirculated or exhausted.

Contained change collars can isolate loaded filters during maintenance.

Preocupações do produto do cliente

A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.

Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.

Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.

Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.

Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.

Aplicações típicas

Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation

Parâmetros técnicos

Typical configurable construction ranges for an enclosed powder containment booth are listed below.

Material principal	High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings
Painel de espessura	75-120 mm pressure-resistant enclosure panels
Largura efetiva	2000-5000 mm clear process-room width
Comprimento máximo	Up to 10000 mm enclosed booth length
Aço enfrentando espessura	1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel
Densidade Core	100-150 kg/m³ high-density mineral-wool core
Condutividade térmica	0.035-0.045 W/(m·K) for the mineral-wool core
Superfície acabado	Fine-brushed or electropolished SUS316L interior with sealed external powder coating
Tipo conjunto	Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Personnel and material airlocksBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow

Planning a Enclosed Powder Containment Booth specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe