Complete enclosed powder containment booth with gasketed access doors

層流 · 封じ込め装置

閉じた粉の収容ブース

A fully enclosed negative-pressure booth that separates manual powder work from the surrounding room through gasketed access, monitored airflow and staged filtration.

Fully Enclosed Process Zone
Gasketed Access Doors
Monitored Negative Pressure
Contained Filter Change Options

見積もりリクエスト製品案内

商品紹介

This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.

主要な特徴

Sealed walls and doors establish a defined pressure boundary around the process.

Separated personnel and material openings can reduce crossing traffic.

External view panels permit supervision without opening the booth.

Staged filters retain airborne powder before air is recirculated or exhausted.

Contained change collars can isolate loaded filters during maintenance.

お客様の製品に関する懸念事項

A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.

Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.

Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.

Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.

Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.

典型的な用途

Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation

技術的なパラメータ

Typical configurable construction ranges for an enclosed powder containment booth are listed below.

コア材料	High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings
パネルの厚さ	75-120 mm pressure-resistant enclosure panels
有効幅	2000-5000 mm clear process-room width
最大長さ	Up to 10000 mm enclosed booth length
鋼鉄の厚さを直面する	1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel
コア密度	100-150 kg/m³ high-density mineral-wool core
熱伝導率	ミネラルウールコアのための 0.035 — 0.045 W / （ m · K ）
表面仕上げ	Fine-brushed or electropolished SUS316L interior with sealed external powder coating
ジョイントタイプ	Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Personnel and material airlocksBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow

Planning a Enclosed Powder Containment Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する