Complete enclosed powder containment booth with gasketed access doors

Aliran Laminar dan Peralatan Pengekangan

Booth Pengekangan Serbuk Tertutup

A fully enclosed negative-pressure booth that separates manual powder work from the surrounding room through gasketed access, monitored airflow and staged filtration.

Fully Enclosed Process Zone
Gasketed Access Doors
Tekanan Negatif yang Dipantau
Contained Filter Change Options

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.

Ciri-ciri Utama

Sealed walls and doors establish a defined pressure boundary around the process.

Separated personnel and material openings can reduce crossing traffic.

External view panels permit supervision without opening the booth.

Staged filters retain airborne powder before air is recirculated or exhausted.

Contained change collars can isolate loaded filters during maintenance.

Kebimbangan Produk Pelanggan

A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.

Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.

Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.

Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.

Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.

Permohonan yang biasa

Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation

Parameter teknikal

Typical configurable construction ranges for an enclosed powder containment booth are listed below.

Bahan Teras	High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings
Ketebalan Panel	75-120 mm pressure-resistant enclosure panels
Lebar berkesan	2000-5000 mm clear process-room width
Panjang maksimum	Up to 10000 mm enclosed booth length
Keluli Menghadapi Ketebalan	1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel
Ketumpatan teras	100-150 kg/m³ high-density mineral-wool core
Kekonduksian Terma	0.035-0.045 W/(m·K) for the mineral-wool core
Kemasan permukaan	Fine-brushed or electropolished SUS316L interior with sealed external powder coating
Jenis Bersatu	Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Personnel and material airlocksBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow

Planning a Enclosed Powder Containment Booth specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami