Complete enclosed powder containment booth with gasketed access doors

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

파우더 격리 부스 (Powder Containment Booth)

A fully enclosed negative-pressure booth that separates manual powder work from the surrounding room through gasketed access, monitored airflow and staged filtration.

Fully Enclosed Process Zone
Gasketed Access Doors
Monitored Negative Pressure
Contained Filter Change Options

견적 요청 제품 찾아보기

상품 소개

This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.

주요 기능

Sealed walls and doors establish a defined pressure boundary around the process.

Separated personnel and material openings can reduce crossing traffic.

External view panels permit supervision without opening the booth.

Staged filters retain airborne powder before air is recirculated or exhausted.

Contained change collars can isolate loaded filters during maintenance.

고객 제품 관심사

A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.

Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.

Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.

Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.

Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.

일반적인 응용 프로그램

Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation

기술 매개변수

Typical configurable construction ranges for an enclosed powder containment booth are listed below.

핵심 재료	High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings
패널 두께	75-120 mm pressure-resistant enclosure panels
유효 폭	2000-5000 mm clear process-room width
최대 길이	Up to 10000 mm enclosed booth length
강철 면면 두께	1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel
코어 밀도	100-150 kg/m³ high-density mineral-wool core
열전도도 (Thermal Conductivity)	미네랄 울 코어용 0. 035 - 0. 045 W / (m · K)
표면 마무리	Fine-brushed or electropolished SUS316L interior with sealed external powder coating
접합 유형	Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Personnel and material airlocksBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow

Planning a Enclosed Powder Containment Booth specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.