Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Z Booth de contenu de poudre par
A fully enclosed negative-pressure booth that separates manual powder work from the surrounding room through gasketed access, monitored airflow and staged filtration.
- Fully Enclosed Process Zone
- Gasketed Access Doors
- Monitored Negative Pressure
- Contained Filter Change Options
Introduction de produit
This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.
Key Features
Separated personnel and material openings can reduce crossing traffic.
External view panels permit supervision without opening the booth.
Staged filters retain airborne powder before air is recirculated or exhausted.
Contained change collars can isolate loaded filters during maintenance.
Préoccupations du client produit
A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.
Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.
Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.
Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.
Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.
Les applications typiques
Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation
Paramètres techniques
Typical configurable construction ranges for an enclosed powder containment booth are listed below.
| Matériaux de base | High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings |
|---|---|
| Panneau épaisseur | 75-120 mm pressure-resistant enclosure panels |
| Largeur effective | 2000-5000 mm clear process-room width |
| Longueur maximale | Up to 10000 mm enclosed booth length |
| Acier face épaisseur | 1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel |
| Densité Core | 100-150 kg/m³ high-density mineral-wool core |
| Conductivité thermique | 0.035-0.045 W/(m·K) for the mineral-wool core |
| surface finie | Fine-brushed or electropolished SUS316L interior with sealed external powder coating |
| Type joint | Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Personnel and material airlocksBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow
Planning a Enclosed Powder Containment Booth specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
