Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Instrumentos de ensaio e validação de sala limpa
Manômetro digital
A pocket-size digital differential manometer for filter pressure-drop checks, ventilation static pressure and Pitot-tube velocity measurements.
- Pocket-size compensated pressure measurement.
- Hands-free magnetic mounting.
- Differential pressure and Pitot velocity modes.
Introdução do produto
This compact digital manometer combines a temperature-compensated pressure sensor with two top hose connections and a bright display. It is intended for quick differential and static pressure checks where portability matters. Selectable units, zero adjustment and a magnetic rear surface support hands-free measurements at air handlers, filters and duct test points.
Características-chave
Two protected hose nipples enable differential pressure connections.
Pocket-size housing fits routine inspection and maintenance kits.
Backlit display remains readable in service voids and plant rooms.
Magnetic rear surface enables hands-free mounting on steel equipment.
Optional Pitot tube extends use to duct velocity measurement.
Preocupações do produto do cliente
Routine filter and duct checks require a compact instrument that can be secured near the test taps and read clearly in restricted service locations.
A service instrument must be portable without sacrificing pressure resolution.The compact compensated sensor package provides useful low-pressure resolution in a pocket-size body.
Operators need both hands to position tubing at equipment taps.A magnetic rear surface holds the meter on a steel panel during the reading.
Dim ceiling and plant spaces make small displays difficult to read.An illuminated high-contrast display improves visibility at the test point.
Different procedures specify different pressure units.Selectable engineering units remove the need for manual conversion.
Aplicações típicas
Cleanroom filter pressure-drop checksHVAC static-pressure measurementAir-handler commissioningDuct Pitot-tube velocity testingRoutine ventilation maintenance
Parâmetros técnicos
Representative construction dimensions for a pocket digital manometer are listed below; range, pressure units and probe accessories may be selected for the maintenance program.
| Material principal | Temperature-compensated differential sensor, brass hose ports and ABS instrument enclosure |
|---|---|
| Painel de espessura | Typically 1.8-2.8 mm for the molded pocket-meter housing |
| Largura efetiva | Approximately 45-55 mm across the instrument body |
| Comprimento máximo | Approximately 115-130 mm including the protective port cap |
| Aço enfrentando espessura | Typically 0.5-0.8 mm for the optional stainless Pitot probe |
| Densidade Core | Approximately 1030-1080 kg/m³ for the ABS enclosure |
| Condutividade térmica | Approximately 0.17-0.20 W/(m·K) for the ABS enclosure |
| Superfície acabado | Matte graphite housing with blue and red port markers and a clear display window |
| Tipo conjunto | Twin barbed pressure connections with flexible tubing and removable protective cap |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Standard or extended pressure rangeFlexible tubing setPitot tubeStatic-pressure tipsMagnetic rear mountProtective soft case
Planning a Digital Manometer specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
