Digital manometer in three-quarter full view with twin pressure ports

クリーンルーム試験 · 検証機器

デジタルマノメータ

A pocket-size digital differential manometer for filter pressure-drop checks, ventilation static pressure and Pitot-tube velocity measurements.

Pocket-size compensated pressure measurement.
Hands-free magnetic mounting.
Differential pressure and Pitot velocity modes.

見積もりリクエスト製品案内

商品紹介

This compact digital manometer combines a temperature-compensated pressure sensor with two top hose connections and a bright display. It is intended for quick differential and static pressure checks where portability matters. Selectable units, zero adjustment and a magnetic rear surface support hands-free measurements at air handlers, filters and duct test points.

主要な特徴

Temperature-compensated sensor supports repeatable low-pressure readings.

Two protected hose nipples enable differential pressure connections.

Pocket-size housing fits routine inspection and maintenance kits.

Backlit display remains readable in service voids and plant rooms.

Magnetic rear surface enables hands-free mounting on steel equipment.

Optional Pitot tube extends use to duct velocity measurement.

お客様の製品に関する懸念事項

Routine filter and duct checks require a compact instrument that can be secured near the test taps and read clearly in restricted service locations.

A service instrument must be portable without sacrificing pressure resolution.The compact compensated sensor package provides useful low-pressure resolution in a pocket-size body.

Operators need both hands to position tubing at equipment taps.A magnetic rear surface holds the meter on a steel panel during the reading.

Dim ceiling and plant spaces make small displays difficult to read.An illuminated high-contrast display improves visibility at the test point.

Different procedures specify different pressure units.Selectable engineering units remove the need for manual conversion.

典型的な用途

Cleanroom filter pressure-drop checksHVAC static-pressure measurementAir-handler commissioningDuct Pitot-tube velocity testingRoutine ventilation maintenance

技術的なパラメータ

Representative construction dimensions for a pocket digital manometer are listed below; range, pressure units and probe accessories may be selected for the maintenance program.

コア材料	Temperature-compensated differential sensor, brass hose ports and ABS instrument enclosure
パネルの厚さ	Typically 1.8-2.8 mm for the molded pocket-meter housing
有効幅	Approximately 45-55 mm across the instrument body
最大長さ	Approximately 115-130 mm including the protective port cap
鋼鉄の厚さを直面する	Typically 0.5-0.8 mm for the optional stainless Pitot probe
コア密度	Approximately 1030-1080 kg/m³ for the ABS enclosure
熱伝導率	Approximately 0.17-0.20 W/(m·K) for the ABS enclosure
表面仕上げ	Matte graphite housing with blue and red port markers and a clear display window
ジョイントタイプ	Twin barbed pressure connections with flexible tubing and removable protective cap
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Standard or extended pressure rangeFlexible tubing setPitot tubeStatic-pressure tipsMagnetic rear mountProtective soft case

Planning a Digital Manometer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する