English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Приборы для испытаний и валидации в чистых помещениях
Цифровой манометр
A pocket-size digital differential manometer for filter pressure-drop checks, ventilation static pressure and Pitot-tube velocity measurements.
- Pocket-size compensated pressure measurement.
- Hands-free magnetic mounting.
- Differential pressure and Pitot velocity modes.
Введение продукции
This compact digital manometer combines a temperature-compensated pressure sensor with two top hose connections and a bright display. It is intended for quick differential and static pressure checks where portability matters. Selectable units, zero adjustment and a magnetic rear surface support hands-free measurements at air handlers, filters and duct test points.
Основные характеристики
Two protected hose nipples enable differential pressure connections.
Pocket-size housing fits routine inspection and maintenance kits.
Backlit display remains readable in service voids and plant rooms.
Magnetic rear surface enables hands-free mounting on steel equipment.
Optional Pitot tube extends use to duct velocity measurement.
Обеспокоенность клиентов продуктами
Routine filter and duct checks require a compact instrument that can be secured near the test taps and read clearly in restricted service locations.
A service instrument must be portable without sacrificing pressure resolution.The compact compensated sensor package provides useful low-pressure resolution in a pocket-size body.
Operators need both hands to position tubing at equipment taps.A magnetic rear surface holds the meter on a steel panel during the reading.
Dim ceiling and plant spaces make small displays difficult to read.An illuminated high-contrast display improves visibility at the test point.
Different procedures specify different pressure units.Selectable engineering units remove the need for manual conversion.
Типичные приложения
Cleanroom filter pressure-drop checksHVAC static-pressure measurementAir-handler commissioningDuct Pitot-tube velocity testingRoutine ventilation maintenance
Технические параметры
Representative construction dimensions for a pocket digital manometer are listed below; range, pressure units and probe accessories may be selected for the maintenance program.
| Основной материал | Temperature-compensated differential sensor, brass hose ports and ABS instrument enclosure |
|---|---|
| Толщина панели | Typically 1.8-2.8 mm for the molded pocket-meter housing |
| эффективная ширина | Approximately 45-55 mm across the instrument body |
| Максимальная длина | Approximately 115-130 mm including the protective port cap |
| Толщина линий стали | Typically 0.5-0.8 mm for the optional stainless Pitot probe |
| Плотность ядра | Approximately 1030-1080 kg/m³ for the ABS enclosure |
| Теплопроводимость | Approximately 0.17-0.20 W/(m·K) for the ABS enclosure |
| Поверхностная отделка | Matte graphite housing with blue and red port markers and a clear display window |
| Объединенный тип | Twin barbed pressure connections with flexible tubing and removable protective cap |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Standard or extended pressure rangeFlexible tubing setPitot tubeStatic-pressure tipsMagnetic rear mountProtective soft case
Planning a Digital Manometer specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
