Digital manometer in three-quarter full view with twin pressure ports

클린룸 테스트 및 검증 장비

디지털 압력계

A pocket-size digital differential manometer for filter pressure-drop checks, ventilation static pressure and Pitot-tube velocity measurements.

Pocket-size compensated pressure measurement.
Hands-free magnetic mounting.
Differential pressure and Pitot velocity modes.

견적 요청 제품 찾아보기

상품 소개

This compact digital manometer combines a temperature-compensated pressure sensor with two top hose connections and a bright display. It is intended for quick differential and static pressure checks where portability matters. Selectable units, zero adjustment and a magnetic rear surface support hands-free measurements at air handlers, filters and duct test points.

주요 기능

Temperature-compensated sensor supports repeatable low-pressure readings.

Two protected hose nipples enable differential pressure connections.

Pocket-size housing fits routine inspection and maintenance kits.

Backlit display remains readable in service voids and plant rooms.

Magnetic rear surface enables hands-free mounting on steel equipment.

Optional Pitot tube extends use to duct velocity measurement.

고객 제품 관심사

Routine filter and duct checks require a compact instrument that can be secured near the test taps and read clearly in restricted service locations.

A service instrument must be portable without sacrificing pressure resolution.The compact compensated sensor package provides useful low-pressure resolution in a pocket-size body.

Operators need both hands to position tubing at equipment taps.A magnetic rear surface holds the meter on a steel panel during the reading.

Dim ceiling and plant spaces make small displays difficult to read.An illuminated high-contrast display improves visibility at the test point.

Different procedures specify different pressure units.Selectable engineering units remove the need for manual conversion.

일반적인 응용 프로그램

Cleanroom filter pressure-drop checksHVAC static-pressure measurementAir-handler commissioningDuct Pitot-tube velocity testingRoutine ventilation maintenance

기술 매개변수

Representative construction dimensions for a pocket digital manometer are listed below; range, pressure units and probe accessories may be selected for the maintenance program.

핵심 재료	Temperature-compensated differential sensor, brass hose ports and ABS instrument enclosure
패널 두께	Typically 1.8-2.8 mm for the molded pocket-meter housing
유효 폭	Approximately 45-55 mm across the instrument body
최대 길이	Approximately 115-130 mm including the protective port cap
강철 면면 두께	Typically 0.5-0.8 mm for the optional stainless Pitot probe
코어 밀도	Approximately 1030-1080 kg/m³ for the ABS enclosure
열전도도 (Thermal Conductivity)	Approximately 0.17-0.20 W/(m·K) for the ABS enclosure
표면 마무리	Matte graphite housing with blue and red port markers and a clear display window
접합 유형	Twin barbed pressure connections with flexible tubing and removable protective cap
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Standard or extended pressure rangeFlexible tubing setPitot tubeStatic-pressure tipsMagnetic rear mountProtective soft case

Planning a Digital Manometer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.