Digital manometer in three-quarter full view with twin pressure ports

Temiz Oda Test ve Validasyon Aletleri

Dijital manometre

A pocket-size digital differential manometer for filter pressure-drop checks, ventilation static pressure and Pitot-tube velocity measurements.

Pocket-size compensated pressure measurement.
Hands-free magnetic mounting.
Differential pressure and Pitot velocity modes.

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This compact digital manometer combines a temperature-compensated pressure sensor with two top hose connections and a bright display. It is intended for quick differential and static pressure checks where portability matters. Selectable units, zero adjustment and a magnetic rear surface support hands-free measurements at air handlers, filters and duct test points.

Ana Özellikler

Temperature-compensated sensor supports repeatable low-pressure readings.

Two protected hose nipples enable differential pressure connections.

Pocket-size housing fits routine inspection and maintenance kits.

Backlit display remains readable in service voids and plant rooms.

Magnetic rear surface enables hands-free mounting on steel equipment.

Optional Pitot tube extends use to duct velocity measurement.

Müşteri Ürün Sorunları

Routine filter and duct checks require a compact instrument that can be secured near the test taps and read clearly in restricted service locations.

A service instrument must be portable without sacrificing pressure resolution.The compact compensated sensor package provides useful low-pressure resolution in a pocket-size body.

Operators need both hands to position tubing at equipment taps.A magnetic rear surface holds the meter on a steel panel during the reading.

Dim ceiling and plant spaces make small displays difficult to read.An illuminated high-contrast display improves visibility at the test point.

Different procedures specify different pressure units.Selectable engineering units remove the need for manual conversion.

Tipik uygulamalar

Cleanroom filter pressure-drop checksHVAC static-pressure measurementAir-handler commissioningDuct Pitot-tube velocity testingRoutine ventilation maintenance

Teknik parametreler

Representative construction dimensions for a pocket digital manometer are listed below; range, pressure units and probe accessories may be selected for the maintenance program.

Temel malzemeler	Temperature-compensated differential sensor, brass hose ports and ABS instrument enclosure
Panel kalınlığı	Typically 1.8-2.8 mm for the molded pocket-meter housing
Effective Width (Etkili Genişlik)	Approximately 45-55 mm across the instrument body
Maksimum uzunluk	Approximately 115-130 mm including the protective port cap
Çelik yüz yüze kalınlığı	Typically 0.5-0.8 mm for the optional stainless Pitot probe
Core Density (Çekirdek Yoğunluğu)	Approximately 1030-1080 kg/m³ for the ABS enclosure
Termal İletkenlik	Approximately 0.17-0.20 W/(m·K) for the ABS enclosure
Yüzey bitirme	Matte graphite housing with blue and red port markers and a clear display window
Ortak tip	Twin barbed pressure connections with flexible tubing and removable protective cap
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Standard or extended pressure rangeFlexible tubing setPitot tubeStatic-pressure tipsMagnetic rear mountProtective soft case

Planning a Digital Manometer specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun