Complete curved cleanroom wall panel with smooth radius face

Sistemas de parede e teto para sala limpa

Painel de parede curvo Cleanroom

A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.

Factory-Formed Radius
No Sharp Internal Corner
Formed Honeycomb Support
Smooth Hygienic Transition

Solicite um orçamento. Browse produtos

Introdução do produto

The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.

Características-chave

A broad radius eliminates the inaccessible crease found at a sharp internal corner.

Preformed construction keeps the curve consistent from the top to the bottom of the module.

Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.

Straight connection flanges integrate the arc with standard modular wall panels.

The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.

Preocupações do produto do cliente

Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.

Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.

Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.

A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.

Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.

Aplicações típicas

Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry

Parâmetros técnicos

The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.

Material principal	Formed 3003-series aluminum honeycomb core
Painel de espessura	50 mm
Largura efetiva	300, 600 or 900 mm arc length
Comprimento máximo	3000 mm
Aço enfrentando espessura	0.50 mm rear galvanized steel skin
Densidade Core	Approximately 27 kg/m³
Condutividade térmica	0.11–0.15 W/(m·K)
Superfície acabado	1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing
Tipo conjunto	Straight aluminum edge flanges with flush sealed panel connections
Customização	Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry

Opções disponíveis

R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face

Planning a Curved Cleanroom Wall Panel specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe