Complete curved cleanroom wall panel with smooth radius face

Sistem Dinding dan Langit-langit Cleanroom

Panel Dinding Cleanroom melengkung

A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.

Factory-Formed Radius
No Sharp Internal Corner
Formed Honeycomb Support
Smooth Hygienic Transition

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.

Fitur utama:

A broad radius eliminates the inaccessible crease found at a sharp internal corner.

Preformed construction keeps the curve consistent from the top to the bottom of the module.

Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.

Straight connection flanges integrate the arc with standard modular wall panels.

The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.

Kekhawatiran produk pelanggan

Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.

Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.

Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.

A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.

Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.

Aplikasi yang Tipis

Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry

Parameter teknis

The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.

Bahan inti	Formed 3003-series aluminum honeycomb core
Ketebalan Panel (Panel Thickness)	50 mm
Efektif lebar	300, 600 or 900 mm arc length
Panjang maksimum	3000 mm
Baja menghadap ketebalan	0.50 mm rear galvanized steel skin
Kepadatan inti (core density)	Sekitar 27 kg / m3
Konduktivitas Termal (Thermal Conductivity)	0.11 - 0.15 W / (m · K)
Permukaan selesai	1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing
Jenis Bersama	Straight aluminum edge flanges with flush sealed panel connections
Customization (Kustomisasi)	Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry

Pilihan yang tersedia

R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face

Planning a Curved Cleanroom Wall Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami