English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Скригнутая стеновая панель в чистой комнате
A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.
- Factory-Formed Radius
- No Sharp Internal Corner
- Formed Honeycomb Support
- Smooth Hygienic Transition
Введение продукции
The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.
Основные характеристики
Preformed construction keeps the curve consistent from the top to the bottom of the module.
Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.
Straight connection flanges integrate the arc with standard modular wall panels.
The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.
Обеспокоенность клиентов продуктами
Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.
Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.
Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.
A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.
Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.
Типичные приложения
Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry
Технические параметры
The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.
| Основной материал | Formed 3003-series aluminum honeycomb core |
|---|---|
| Толщина панели | 50 mm |
| эффективная ширина | 300, 600 or 900 mm arc length |
| Максимальная длина | 3000 mm |
| Толщина линий стали | 0.50 mm rear galvanized steel skin |
| Плотность ядра | Approximately 27 kg/m³ |
| Теплопроводимость | 0.11–0.15 W/(m·K) |
| Поверхностная отделка | 1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing |
| Объединенный тип | Straight aluminum edge flanges with flush sealed panel connections |
| Customization | Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry |
Доступные варианты
R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face
Planning a Curved Cleanroom Wall Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
