Complete curved cleanroom wall panel with smooth radius face

クリーンルームの壁と天井システム

曲げられたクリーンルームの壁パネル

A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.

Factory-Formed Radius
No Sharp Internal Corner
Formed Honeycomb Support
Smooth Hygienic Transition

見積もりリクエスト製品案内

商品紹介

The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.

主要な特徴

A broad radius eliminates the inaccessible crease found at a sharp internal corner.

Preformed construction keeps the curve consistent from the top to the bottom of the module.

Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.

Straight connection flanges integrate the arc with standard modular wall panels.

The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.

お客様の製品に関する懸念事項

Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.

Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.

Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.

A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.

Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.

典型的な用途

Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry

技術的なパラメータ

The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.

コア材料	Formed 3003-series aluminum honeycomb core
パネルの厚さ	50 mm
有効幅	300, 600 or 900 mm arc length
最大長さ	3000 mm
鋼鉄の厚さを直面する	0.50 mm rear galvanized steel skin
コア密度	約 27 kg / m3
熱伝導率	0.11 — 0.15 W / （m · K）
表面仕上げ	1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing
ジョイントタイプ	Straight aluminum edge flanges with flush sealed panel connections
カスタマイズ	Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry

利用可能なオプション

R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face

Planning a Curved Cleanroom Wall Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する