Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Wand - und Deckensysteme
Curved Cleanroom Wall Panel
A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.
- Factory-Formed Radius
- No Sharp Internal Corner
- Formed Honeycomb Support
- Smooth Hygienic Transition
Produkteinführung
The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.
Key Features
Preformed construction keeps the curve consistent from the top to the bottom of the module.
Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.
Straight connection flanges integrate the arc with standard modular wall panels.
The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.
Kunden Produktbedenken
Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.
Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.
Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.
A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.
Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.
Typische Anwendungen
Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry
Technische Parameter
The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.
| Core Material | Formed 3003-series aluminum honeycomb core |
|---|---|
| Panel Dicke | 50 mm |
| Effektive Breite | 300, 600 or 900 mm arc length |
| Maximale Länge | 3000 mm |
| Stahl facing Dicke | 0.50 mm rear galvanized steel skin |
| Kerndichte | Approximately 27 kg/m³ |
| Thermische Leitfähigkeit | 0.11–0.15 W/(m·K) |
| Oberfläche Finish | 1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing |
| Gemeinsamer Typ | Straight aluminum edge flanges with flush sealed panel connections |
| Customisierung | Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry |
Verfügbare Optionen
R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face
Planning a Curved Cleanroom Wall Panel specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
