English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
منحني لوحة الحائط غرف الأبحاث
A factory-formed radius module with an aluminum honeycomb core and smooth metal face, used to create continuous curved transitions at cleanroom corners, wall ends and ceiling junctions.
- Factory-Formed Radius
- No Sharp Internal Corner
- Formed Honeycomb Support
- Smooth Hygienic Transition
مقدمة المنتج
The Curved Cleanroom Wall Panel replaces a multi-piece corner trim with a broad, preformed arc. A rigid aluminum honeycomb center holds the selected radius between a shaped aluminum room face and a galvanized steel backing skin. Straight side edges connect to adjacent modular panels through matching aluminum profiles, allowing the curve to read as part of the wall rather than an applied cover. The rounded geometry removes a tight ninety-degree recess and gives cleaning tools a continuous path across wall-to-wall or wall-to-ceiling transitions.
الخصائص الرئيسية
Preformed construction keeps the curve consistent from the top to the bottom of the module.
Honeycomb support prevents the shaped face from oil-canning under normal cleaning pressure.
Straight connection flanges integrate the arc with standard modular wall panels.
The smooth metal face accepts the same cleaning routine as adjacent cleanroom surfaces.
مخاوف المنتج للعملاء
Curved-wall buyers look for consistent radii, minimal dirt traps, reliable straight-to-curve joints and durable shaped surfaces.
Small corner trims leave narrow seams that are difficult to reach with wipes and mops.A wide factory-formed arc moves the joints away from the deepest part of the corner.
Site-bent sheet metal often develops waves or an uneven radius along its height.Honeycomb-backed forming holds a repeatable curve and supports the visible face continuously.
A curved insert can sit proud of neighboring straight panels and create a ledge.Matching edge profiles align the arc face with the adjoining modular wall surfaces.
Trolleys can damage exposed sharp corners in narrow clean corridors.A rounded end-return geometry spreads incidental contact over a broader surface.
تطبيقات نموذجية
Operating-room wall cornersPharmaceutical cleanroom transitionsLaboratory wall-to-ceiling junctionsHygienic corridor end returnsFood and medical production rooms with rounded internal geometry
المعلمات الفنية
The standard arc construction below is based on a 50 mm honeycomb panel with common hygienic corner radii.
| المواد الأساسية | Formed 3003-series aluminum honeycomb core |
|---|---|
| سمك اللوحة | 50 mm |
| العرض الفعال | 300, 600 or 900 mm arc length |
| الحد الأقصى الطول | 3000 mm |
| الصلب يواجه سمك | 0.50 mm rear galvanized steel skin |
| الكثافة الأساسية | Approximately 27 kg/m³ |
| الموصلية الحرارية | 0.11–0.15 W/(m·K) |
| إنهاء السطح | 1.20 mm smooth anti-fingerprint aluminum room face with coated-steel backing |
| نوع المشترك | Straight aluminum edge flanges with flush sealed panel connections |
| التخصيص | Radius, arc angle and transition direction can be made for the intended wall or ceiling geometry |
الخيارات المتاحة
R150 or R300 internal radius90-degree corner or 180-degree end returnWall-to-wall or wall-to-ceiling orientationPowder-coated or anti-fingerprint aluminum face
Planning a Curved Cleanroom Wall Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
