Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Combinação de Fogo e Fumo Damper
An actuated multiblade assembly that restricts smoke leakage during control sequences and closes the protected duct opening when its thermal release operates.
- Dual Fire and Smoke Function
- Sealed Airfoil Blade Bank
- Spring-Return Safety Actuator
- Open-Close Position Feedback
Introdução do produto
The combination fire and smoke damper integrates a sealed multiblade smoke-control assembly with a thermally responsive closure device in one sleeved penetration unit. During normal operation the external actuator can open, close or modulate the airfoil blades for system sequences. A smoke-control command drives the spring-return actuator toward its safety position, while the thermal release provides an independent response to elevated temperature. Blade and jamb seals restrict leakage, and end switches can report the fully open and fully closed positions.
Características-chave
Airfoil blades reduce operating pressure drop while edge and jamb seals improve closed-position smoke control.
A spring-return actuator drives the selected safety position when control power is removed.
Thermal release and optional position switches support independent closure response and remote status monitoring.
Preocupações do produto do cliente
Combined protection depends on correct installation at the rated opening, adequate actuator torque, intact blade seals and a control sequence that distinguishes smoke response from normal HVAC operation.
Separate fire and smoke dampers require extra duct length and two access locations.A single combination assembly consolidates thermal closure, sealed blades and actuation at one penetration.
A weak actuator cannot close the blade bank against fan pressure and seal friction.The spring-return torque is selected from damper area, blade arrangement and maximum differential pressure.
Operators cannot tell whether the damper reached its commanded safety position.Blade-linked open and closed switches provide status independent of the controller command signal.
Seal damage goes unnoticed because only actuator movement is tested.Periodic access to the blade edges and jambs allows the mechanical closure and compressible seals to be inspected together.
Aplicações típicas
Cleanroom fire and smoke compartment boundariesHospital smoke-control zonesLaboratory supply and exhaust penetrationsPharmaceutical production corridorsHigh-rise HVAC shafts and floors
Parâmetros técnicos
Typical mechanical construction ranges for a rectangular combination fire and smoke damper are listed below.
| Material principal | Galvanized-steel airfoil blades with silicone or TPE smoke seals, steel shafts and thermal release |
|---|---|
| Painel de espessura | 1.2–1.5 mm fabricated airfoil blade skins and frame components |
| Largura efetiva | 152–1219 mm nominal single-section opening width |
| Comprimento máximo | Up to 1880 mm nominal single-section opening height |
| Aço enfrentando espessura | 1.2–1.5 mm galvanized sleeve and damper frame |
| Densidade Core | Approximately 7850 kg/m³ for galvanized steel blades and frame |
| Condutividade térmica | Approximately 45–55 W/(m·K) for carbon-steel airflow components |
| Superfície acabado | Mill-galvanized blade, frame and sleeve with heat-resistant seals and protected actuator bracket |
| Tipo conjunto | Sleeved flanged frame with linked sealed blades, spring-return actuator and thermal closure device |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
1.5-hour or 3-hour construction family24 V, 120 V or 230 V spring-return actuatorAuxiliary open-close indicationGalvanized, 304 or 316 stainless-steel airflow components
Planning a Combination Fire and Smoke Damper specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
