Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Manuseio e Armazenamento de Materiais em Sala Limpa
Cleanroom Tote Container
A light-gray molded cleanroom tote container with tapered walls, reinforced rim and base, fitted removable lid, ribbed side panels and recessed end grips.
- One-piece polymer body avoids corrosion and flaking surface coatings
- Reinforced 600 × 400-style footprint interfaces efficiently with carts and shelving
- Fitted lid protects work-in-process parts while preserving stackability
Introdução do produto
This reusable tote provides a lightweight alternative to metal boxes for routine cleanroom transfer and storage. The injection-molded body combines a reinforced upper rim, radiused interior and molded external ribs without separate fasteners. A shallow fitted lid closes the open top for covered staging, and recessed hand grips remain inside the tote footprint so adjacent units can be packed closely.
Características-chave
Ribbed sidewalls stiffen the body without inserting loose structural parts.
Standardized rectangular proportions support efficient shelf and cart loading.
Recessed end grips allow lifting without projecting hardware.
Closed totes can stack; compatible empty bodies can nest when the lid is removed.
Preocupações do produto do cliente
Corrugated boxes release fibers, metal bins add unnecessary weight, and projecting handles waste space on densely loaded carts.
Fiber contamination from disposable packagingThe reusable molded body replaces corrugated material inside controlled areas.
Container deformation under stackingReinforced rim, base and ribs distribute compression around the shell.
Poor space utilizationA standardized rectangular footprint and recessed grips support close packing.
Electrostatic risk for sensitive partsA compatible static-dissipative polymer formulation can be specified.
Aplicações típicas
Closed-loop movement of cleaned parts, device components, consumable packs, small tooling and work-in-process kits in electronics, medical-device, pharmaceutical packaging and laboratory clean areas.
Parâmetros técnicos
Wall taper, rib layout and rim section are molded as one structure to balance stiffness, nesting clearance and material use. Polymer grade may be natural, color-coded or static-dissipative according to the contamination and electrostatic-control plan. The fitted lid provides routine particulate protection but is not a pressure seal or liquid-tight closure unless a dedicated gasketed version is selected.
| Material principal | Virgin polypropylene or high-density polyethylene, with static-dissipative formulation optional |
|---|---|
| Painel de espessura | 3.0–6.0 mm nominal molded wall thickness |
| Largura efetiva | 300–400 mm usable internal width |
| Comprimento máximo | Up to 800 mm overall tote length |
| Aço enfrentando espessura | 0 mm; no steel facing used in the molded polymer body |
| Densidade Core | 900–960 kg/m³ typical polypropylene or HDPE density |
| Condutividade térmica | Approximately 0.22–0.50 W/(m·K) at room temperature |
| Superfície acabado | Smooth satin molded surface with radiused cleanable interior |
| Tipo conjunto | One-piece injection-molded body with reinforced stack rim and removable fitted lid |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Polypropylene or HDPE, natural gray or application color coding, static-dissipative compound, alternative heights, removable lid, divider set, tamper-evident tie holes, identification pocket, conductive label holder and matched dolly.
Planning a Cleanroom Tote Container specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
