Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Manejo y almacenamiento de materiales de sala limpia
Contenedor de limpieza Tote por
A light-gray molded cleanroom tote container with tapered walls, reinforced rim and base, fitted removable lid, ribbed side panels and recessed end grips.
- One-piece polymer body avoids corrosion and flaking surface coatings
- Reinforced 600 × 400-style footprint interfaces efficiently with carts and shelving
- Fitted lid protects work-in-process parts while preserving stackability
Introducción del producto
This reusable tote provides a lightweight alternative to metal boxes for routine cleanroom transfer and storage. The injection-molded body combines a reinforced upper rim, radiused interior and molded external ribs without separate fasteners. A shallow fitted lid closes the open top for covered staging, and recessed hand grips remain inside the tote footprint so adjacent units can be packed closely.
Características clave
Ribbed sidewalls stiffen the body without inserting loose structural parts.
Standardized rectangular proportions support efficient shelf and cart loading.
Recessed end grips allow lifting without projecting hardware.
Closed totes can stack; compatible empty bodies can nest when the lid is removed.
Preocupaciones del producto del cliente
Corrugated boxes release fibers, metal bins add unnecessary weight, and projecting handles waste space on densely loaded carts.
Fiber contamination from disposable packagingThe reusable molded body replaces corrugated material inside controlled areas.
Container deformation under stackingReinforced rim, base and ribs distribute compression around the shell.
Poor space utilizationA standardized rectangular footprint and recessed grips support close packing.
Electrostatic risk for sensitive partsA compatible static-dissipative polymer formulation can be specified.
Aplicaciones típicas
Closed-loop movement of cleaned parts, device components, consumable packs, small tooling and work-in-process kits in electronics, medical-device, pharmaceutical packaging and laboratory clean areas.
Parámetros técnicos
Wall taper, rib layout and rim section are molded as one structure to balance stiffness, nesting clearance and material use. Polymer grade may be natural, color-coded or static-dissipative according to the contamination and electrostatic-control plan. The fitted lid provides routine particulate protection but is not a pressure seal or liquid-tight closure unless a dedicated gasketed version is selected.
| Materiales Core | Virgin polypropylene or high-density polyethylene, with static-dissipative formulation optional |
|---|---|
| Panel de espesor | 3.0–6.0 mm nominal molded wall thickness |
| Ancho efectivo | 300–400 mm usable internal width |
| Longitud máxima | Up to 800 mm overall tote length |
| Acero frente a espesor | 0 mm; no steel facing used in the molded polymer body |
| Densidad Core | 900–960 kg/m³ typical polypropylene or HDPE density |
| Conductividad térmica | Approximately 0.22–0.50 W/(m·K) at room temperature |
| Superficie acabada | Smooth satin molded surface with radiused cleanable interior |
| Tipo conjunto | One-piece injection-molded body with reinforced stack rim and removable fitted lid |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Polypropylene or HDPE, natural gray or application color coding, static-dissipative compound, alternative heights, removable lid, divider set, tamper-evident tie holes, identification pocket, conductive label holder and matched dolly.
Planning a Cleanroom Tote Container specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
