Complete light-gray cleanroom tote container in front-left three-quarter view

클린룸 재료 취급 및 보관

클린룸 가방 컨테이너

A light-gray molded cleanroom tote container with tapered walls, reinforced rim and base, fitted removable lid, ribbed side panels and recessed end grips.

One-piece polymer body avoids corrosion and flaking surface coatings
Reinforced 600 × 400-style footprint interfaces efficiently with carts and shelving
Fitted lid protects work-in-process parts while preserving stackability

견적 요청 제품 찾아보기

상품 소개

This reusable tote provides a lightweight alternative to metal boxes for routine cleanroom transfer and storage. The injection-molded body combines a reinforced upper rim, radiused interior and molded external ribs without separate fasteners. A shallow fitted lid closes the open top for covered staging, and recessed hand grips remain inside the tote footprint so adjacent units can be packed closely.

주요 기능

Industrial polymer will not rust, dent like thin sheet metal or shed paint.

Ribbed sidewalls stiffen the body without inserting loose structural parts.

Standardized rectangular proportions support efficient shelf and cart loading.

Recessed end grips allow lifting without projecting hardware.

Closed totes can stack; compatible empty bodies can nest when the lid is removed.

고객 제품 관심사

Corrugated boxes release fibers, metal bins add unnecessary weight, and projecting handles waste space on densely loaded carts.

Fiber contamination from disposable packagingThe reusable molded body replaces corrugated material inside controlled areas.

Container deformation under stackingReinforced rim, base and ribs distribute compression around the shell.

Poor space utilizationA standardized rectangular footprint and recessed grips support close packing.

Electrostatic risk for sensitive partsA compatible static-dissipative polymer formulation can be specified.

일반적인 응용 프로그램

Closed-loop movement of cleaned parts, device components, consumable packs, small tooling and work-in-process kits in electronics, medical-device, pharmaceutical packaging and laboratory clean areas.

기술 매개변수

Wall taper, rib layout and rim section are molded as one structure to balance stiffness, nesting clearance and material use. Polymer grade may be natural, color-coded or static-dissipative according to the contamination and electrostatic-control plan. The fitted lid provides routine particulate protection but is not a pressure seal or liquid-tight closure unless a dedicated gasketed version is selected.

핵심 재료	Virgin polypropylene or high-density polyethylene, with static-dissipative formulation optional
패널 두께	3.0–6.0 mm nominal molded wall thickness
유효 폭	300–400 mm usable internal width
최대 길이	Up to 800 mm overall tote length
강철 면면 두께	0 mm; no steel facing used in the molded polymer body
코어 밀도	900–960 kg/m³ typical polypropylene or HDPE density
열전도도 (Thermal Conductivity)	Approximately 0.22–0.50 W/(m·K) at room temperature
표면 마무리	Smooth satin molded surface with radiused cleanable interior
접합 유형	One-piece injection-molded body with reinforced stack rim and removable fitted lid
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Polypropylene or HDPE, natural gray or application color coding, static-dissipative compound, alternative heights, removable lid, divider set, tamper-evident tie holes, identification pocket, conductive label holder and matched dolly.

Planning a Cleanroom Tote Container specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.