Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Material Handling und Lagerung
Cleanroom Tote Container
A light-gray molded cleanroom tote container with tapered walls, reinforced rim and base, fitted removable lid, ribbed side panels and recessed end grips.
- One-piece polymer body avoids corrosion and flaking surface coatings
- Reinforced 600 × 400-style footprint interfaces efficiently with carts and shelving
- Fitted lid protects work-in-process parts while preserving stackability
Produkteinführung
This reusable tote provides a lightweight alternative to metal boxes for routine cleanroom transfer and storage. The injection-molded body combines a reinforced upper rim, radiused interior and molded external ribs without separate fasteners. A shallow fitted lid closes the open top for covered staging, and recessed hand grips remain inside the tote footprint so adjacent units can be packed closely.
Key Features
Ribbed sidewalls stiffen the body without inserting loose structural parts.
Standardized rectangular proportions support efficient shelf and cart loading.
Recessed end grips allow lifting without projecting hardware.
Closed totes can stack; compatible empty bodies can nest when the lid is removed.
Kunden Produktbedenken
Corrugated boxes release fibers, metal bins add unnecessary weight, and projecting handles waste space on densely loaded carts.
Fiber contamination from disposable packagingThe reusable molded body replaces corrugated material inside controlled areas.
Container deformation under stackingReinforced rim, base and ribs distribute compression around the shell.
Poor space utilizationA standardized rectangular footprint and recessed grips support close packing.
Electrostatic risk for sensitive partsA compatible static-dissipative polymer formulation can be specified.
Typische Anwendungen
Closed-loop movement of cleaned parts, device components, consumable packs, small tooling and work-in-process kits in electronics, medical-device, pharmaceutical packaging and laboratory clean areas.
Technische Parameter
Wall taper, rib layout and rim section are molded as one structure to balance stiffness, nesting clearance and material use. Polymer grade may be natural, color-coded or static-dissipative according to the contamination and electrostatic-control plan. The fitted lid provides routine particulate protection but is not a pressure seal or liquid-tight closure unless a dedicated gasketed version is selected.
| Core Material | Virgin polypropylene or high-density polyethylene, with static-dissipative formulation optional |
|---|---|
| Panel Dicke | 3.0–6.0 mm nominal molded wall thickness |
| Effektive Breite | 300–400 mm usable internal width |
| Maximale Länge | Up to 800 mm overall tote length |
| Stahl facing Dicke | 0 mm; no steel facing used in the molded polymer body |
| Kerndichte | 900–960 kg/m³ typical polypropylene or HDPE density |
| Thermische Leitfähigkeit | Approximately 0.22–0.50 W/(m·K) at room temperature |
| Oberfläche Finish | Smooth satin molded surface with radiused cleanable interior |
| Gemeinsamer Typ | One-piece injection-molded body with reinforced stack rim and removable fitted lid |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Polypropylene or HDPE, natural gray or application color coding, static-dissipative compound, alternative heights, removable lid, divider set, tamper-evident tie holes, identification pocket, conductive label holder and matched dolly.
Planning a Cleanroom Tote Container specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
