Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Handling et stockage des matériaux Cleanroom
Cleanroom Tote Container
A light-gray molded cleanroom tote container with tapered walls, reinforced rim and base, fitted removable lid, ribbed side panels and recessed end grips.
- One-piece polymer body avoids corrosion and flaking surface coatings
- Reinforced 600 × 400-style footprint interfaces efficiently with carts and shelving
- Fitted lid protects work-in-process parts while preserving stackability
Introduction de produit
This reusable tote provides a lightweight alternative to metal boxes for routine cleanroom transfer and storage. The injection-molded body combines a reinforced upper rim, radiused interior and molded external ribs without separate fasteners. A shallow fitted lid closes the open top for covered staging, and recessed hand grips remain inside the tote footprint so adjacent units can be packed closely.
Key Features
Ribbed sidewalls stiffen the body without inserting loose structural parts.
Standardized rectangular proportions support efficient shelf and cart loading.
Recessed end grips allow lifting without projecting hardware.
Closed totes can stack; compatible empty bodies can nest when the lid is removed.
Préoccupations du client produit
Corrugated boxes release fibers, metal bins add unnecessary weight, and projecting handles waste space on densely loaded carts.
Fiber contamination from disposable packagingThe reusable molded body replaces corrugated material inside controlled areas.
Container deformation under stackingReinforced rim, base and ribs distribute compression around the shell.
Poor space utilizationA standardized rectangular footprint and recessed grips support close packing.
Electrostatic risk for sensitive partsA compatible static-dissipative polymer formulation can be specified.
Les applications typiques
Closed-loop movement of cleaned parts, device components, consumable packs, small tooling and work-in-process kits in electronics, medical-device, pharmaceutical packaging and laboratory clean areas.
Paramètres techniques
Wall taper, rib layout and rim section are molded as one structure to balance stiffness, nesting clearance and material use. Polymer grade may be natural, color-coded or static-dissipative according to the contamination and electrostatic-control plan. The fitted lid provides routine particulate protection but is not a pressure seal or liquid-tight closure unless a dedicated gasketed version is selected.
| Matériaux de base | Virgin polypropylene or high-density polyethylene, with static-dissipative formulation optional |
|---|---|
| Panneau épaisseur | 3.0–6.0 mm nominal molded wall thickness |
| Largeur effective | 300–400 mm usable internal width |
| Longueur maximale | Up to 800 mm overall tote length |
| Acier face épaisseur | 0 mm; no steel facing used in the molded polymer body |
| Densité Core | 900–960 kg/m³ typical polypropylene or HDPE density |
| Conductivité thermique | Approximately 0.22–0.50 W/(m·K) at room temperature |
| surface finie | Smooth satin molded surface with radiused cleanable interior |
| Type joint | One-piece injection-molded body with reinforced stack rim and removable fitted lid |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Polypropylene or HDPE, natural gray or application color coding, static-dissipative compound, alternative heights, removable lid, divider set, tamper-evident tie holes, identification pocket, conductive label holder and matched dolly.
Planning a Cleanroom Tote Container specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
