Cleanroom panic exit touch bar with latch strike and trim hardware

Portas de sala limpa, janelas e sistemas de bloqueio

Dispositivo de saída de pânico para sala limpa

A full-width horizontal touch bar that retracts the exit latch when pushed anywhere across the active surface during emergency egress.

Full-Width Touch Operation
Positive Latch Retraction
Low-Profile Rail
Interior Emergency Egress

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom panic exit device mounts across the inside face of an exit door and converts pressure on the touch rail into immediate latch retraction. An aluminum chassis carries the linkage between the active bar and the stainless latch case, while black end covers and a narrow red safety accent identify the operating surface. The external side can accept a controlled trim handle without defeating free egress from the clean side.

Características-chave

The wide touch surface can be operated without locating a small lever during urgent movement.

A protected linkage transfers bar travel directly to the latch bolt at the door edge.

Smooth anodized and coated surfaces reduce crevices compared with exposed crossbar hardware.

Optional exterior trim allows controlled entry while the interior touch bar remains freely operable.

Preocupações do produto do cliente

Emergency hardware must release intuitively under body pressure while still seating the door securely during normal cleanroom operation.

A small lever is difficult to locate or operate while carrying equipment during evacuation.The horizontal touch surface retracts the latch anywhere along the active rail.

Bulky crossbar mechanisms create exposed pivots and cleaning obstacles.The low-profile enclosed rail protects the internal linkage behind smooth covers.

Uncontrolled outside entry compromises the restricted cleanroom boundary.Compatible exterior trim can remain access-controlled while interior egress stays available.

Aplicações típicas

Cleanroom emergency exit doorsLaboratory escape routesHospital controlled-area exitsPharmaceutical production corridors

Parâmetros técnicos

Representative dimensions and materials for a low-profile cleanroom panic touch bar are provided below.

Material principal	Extruded aluminum rail with steel linkage, stainless latch bolt and polymer end housings
Painel de espessura	Approximately 60–70 mm maximum projection from the door face
Largura efetiva	Approximately 45–60 mm active touch-surface width
Comprimento máximo	Up to 1200 mm rail length for common single-door openings
Aço enfrentando espessura	1.5–2.0 mm stainless-steel latch and strike faceplates
Densidade Core	Approximately 2700 kg/m³ for the aluminum rail material
Condutividade térmica	Approximately 160–205 W/(m·K) for the aluminum chassis
Superfície acabado	Silver anodized aluminum, charcoal touch surface and restrained red safety insert
Tipo conjunto	Surface-mounted touch rail linked to a rim latch and aligned frame strike
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

650–1200 mm cut-to-door railMechanical or electrified monitoringStainless or black exterior trimSingle-point rim or vertical-rod latching

Planning a Cleanroom Panic Exit Device specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe