Cleanroom panic exit touch bar with latch strike and trim hardware

Pintu Bilik Bersih, Windows dan Sistem Interlock

Peranti Keluar Panik Bilik Bersih

A full-width horizontal touch bar that retracts the exit latch when pushed anywhere across the active surface during emergency egress.

Full-Width Touch Operation
Positive Latch Retraction
Low-Profile Rail
Interior Emergency Egress

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom panic exit device mounts across the inside face of an exit door and converts pressure on the touch rail into immediate latch retraction. An aluminum chassis carries the linkage between the active bar and the stainless latch case, while black end covers and a narrow red safety accent identify the operating surface. The external side can accept a controlled trim handle without defeating free egress from the clean side.

Ciri-ciri Utama

The wide touch surface can be operated without locating a small lever during urgent movement.

A protected linkage transfers bar travel directly to the latch bolt at the door edge.

Smooth anodized and coated surfaces reduce crevices compared with exposed crossbar hardware.

Optional exterior trim allows controlled entry while the interior touch bar remains freely operable.

Kebimbangan Produk Pelanggan

Emergency hardware must release intuitively under body pressure while still seating the door securely during normal cleanroom operation.

A small lever is difficult to locate or operate while carrying equipment during evacuation.The horizontal touch surface retracts the latch anywhere along the active rail.

Bulky crossbar mechanisms create exposed pivots and cleaning obstacles.The low-profile enclosed rail protects the internal linkage behind smooth covers.

Uncontrolled outside entry compromises the restricted cleanroom boundary.Compatible exterior trim can remain access-controlled while interior egress stays available.

Permohonan yang biasa

Cleanroom emergency exit doorsLaboratory escape routesHospital controlled-area exitsPharmaceutical production corridors

Parameter teknikal

Representative dimensions and materials for a low-profile cleanroom panic touch bar are provided below.

Bahan Teras	Extruded aluminum rail with steel linkage, stainless latch bolt and polymer end housings
Ketebalan Panel	Approximately 60–70 mm maximum projection from the door face
Lebar berkesan	Approximately 45–60 mm active touch-surface width
Panjang maksimum	Up to 1200 mm rail length for common single-door openings
Keluli Menghadapi Ketebalan	1.5–2.0 mm stainless-steel latch and strike faceplates
Ketumpatan teras	Approximately 2700 kg/m³ for the aluminum rail material
Kekonduksian Terma	Approximately 160–205 W/(m·K) for the aluminum chassis
Kemasan permukaan	Silver anodized aluminum, charcoal touch surface and restrained red safety insert
Jenis Bersatu	Surface-mounted touch rail linked to a rim latch and aligned frame strike
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

650–1200 mm cut-to-door railMechanical or electrified monitoringStainless or black exterior trimSingle-point rim or vertical-rod latching

Planning a Cleanroom Panic Exit Device specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami