English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
جهاز الخروج من الذعر في الغرفة النظيفة
A full-width horizontal touch bar that retracts the exit latch when pushed anywhere across the active surface during emergency egress.
- Full-Width Touch Operation
- Positive Latch Retraction
- Low-Profile Rail
- Interior Emergency Egress
مقدمة المنتج
The cleanroom panic exit device mounts across the inside face of an exit door and converts pressure on the touch rail into immediate latch retraction. An aluminum chassis carries the linkage between the active bar and the stainless latch case, while black end covers and a narrow red safety accent identify the operating surface. The external side can accept a controlled trim handle without defeating free egress from the clean side.
الخصائص الرئيسية
A protected linkage transfers bar travel directly to the latch bolt at the door edge.
Smooth anodized and coated surfaces reduce crevices compared with exposed crossbar hardware.
Optional exterior trim allows controlled entry while the interior touch bar remains freely operable.
مخاوف المنتج للعملاء
Emergency hardware must release intuitively under body pressure while still seating the door securely during normal cleanroom operation.
A small lever is difficult to locate or operate while carrying equipment during evacuation.The horizontal touch surface retracts the latch anywhere along the active rail.
Bulky crossbar mechanisms create exposed pivots and cleaning obstacles.The low-profile enclosed rail protects the internal linkage behind smooth covers.
Uncontrolled outside entry compromises the restricted cleanroom boundary.Compatible exterior trim can remain access-controlled while interior egress stays available.
تطبيقات نموذجية
Cleanroom emergency exit doorsLaboratory escape routesHospital controlled-area exitsممرات إنتاج الأدوية
المعلمات الفنية
Representative dimensions and materials for a low-profile cleanroom panic touch bar are provided below.
| المواد الأساسية | Extruded aluminum rail with steel linkage, stainless latch bolt and polymer end housings |
|---|---|
| سمك اللوحة | Approximately 60–70 mm maximum projection from the door face |
| العرض الفعال | Approximately 45–60 mm active touch-surface width |
| الحد الأقصى الطول | Up to 1200 mm rail length for common single-door openings |
| الصلب يواجه سمك | 1.5–2.0 mm stainless-steel latch and strike faceplates |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum rail material |
| الموصلية الحرارية | Approximately 160–205 W/(m·K) for the aluminum chassis |
| إنهاء السطح | Silver anodized aluminum, charcoal touch surface and restrained red safety insert |
| نوع المشترك | Surface-mounted touch rail linked to a rim latch and aligned frame strike |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
650–1200 mm cut-to-door railMechanical or electrified monitoringStainless or black exterior trimSingle-point rim or vertical-rod latching
Planning a Cleanroom Panic Exit Device specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
