Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Dispositivo de salida de pánico de sala limpia
A full-width horizontal touch bar that retracts the exit latch when pushed anywhere across the active surface during emergency egress.
- Full-Width Touch Operation
- Positive Latch Retraction
- Low-Profile Rail
- Interior Emergency Egress
Introducción del producto
The cleanroom panic exit device mounts across the inside face of an exit door and converts pressure on the touch rail into immediate latch retraction. An aluminum chassis carries the linkage between the active bar and the stainless latch case, while black end covers and a narrow red safety accent identify the operating surface. The external side can accept a controlled trim handle without defeating free egress from the clean side.
Características clave
A protected linkage transfers bar travel directly to the latch bolt at the door edge.
Smooth anodized and coated surfaces reduce crevices compared with exposed crossbar hardware.
Optional exterior trim allows controlled entry while the interior touch bar remains freely operable.
Preocupaciones del producto del cliente
Emergency hardware must release intuitively under body pressure while still seating the door securely during normal cleanroom operation.
A small lever is difficult to locate or operate while carrying equipment during evacuation.The horizontal touch surface retracts the latch anywhere along the active rail.
Bulky crossbar mechanisms create exposed pivots and cleaning obstacles.The low-profile enclosed rail protects the internal linkage behind smooth covers.
Uncontrolled outside entry compromises the restricted cleanroom boundary.Compatible exterior trim can remain access-controlled while interior egress stays available.
Aplicaciones típicas
Cleanroom emergency exit doorsLaboratory escape routesHospital controlled-area exitsPharmaceutical production corridors
Parámetros técnicos
Representative dimensions and materials for a low-profile cleanroom panic touch bar are provided below.
| Materiales Core | Extruded aluminum rail with steel linkage, stainless latch bolt and polymer end housings |
|---|---|
| Panel de espesor | Approximately 60–70 mm maximum projection from the door face |
| Ancho efectivo | Approximately 45–60 mm active touch-surface width |
| Longitud máxima | Up to 1200 mm rail length for common single-door openings |
| Acero frente a espesor | 1.5–2.0 mm stainless-steel latch and strike faceplates |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum rail material |
| Conductividad térmica | Approximately 160–205 W/(m·K) for the aluminum chassis |
| Superficie acabada | Silver anodized aluminum, charcoal touch surface and restrained red safety insert |
| Tipo conjunto | Surface-mounted touch rail linked to a rim latch and aligned frame strike |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
650–1200 mm cut-to-door railMechanical or electrified monitoringStainless or black exterior trimSingle-point rim or vertical-rod latching
Planning a Cleanroom Panic Exit Device specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
