Single-sided cleanroom laboratory wall bench with coved backsplash

Móveis de sala limpa e produtos de aço inoxidável

Banco de parede de laboratório de sala limpa

A single-sided perimeter bench with a coved stainless backsplash and enclosed rear services for clean work along a laboratory wall.

Coved rear backsplash
Enclosed wall-side services
Clear knee and floor space
Modular length configuration

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom laboratory wall bench provides a continuous stainless work surface for perimeter operations while shielding the wall junction from routine spills and residue. Its coved backsplash rises into a slim sealed service rail with covered power and data points above the rear edge. An open powder-coated support frame preserves operator knee space and allows cleaning beneath the full run. Joined bench modules use aligned worktop seams and removable rear covers so services remain reachable from the room side.

Características-chave

A coved stainless transition removes the sharp internal corner between worktop and backsplash.

A narrow raised rail keeps covered utilities behind equipment rather than within the active work area.

Open C-frame supports leave knee space clear and expose the floor-wall edge for cleaning.

Aligned modular sections extend the bench run without adding enclosed base cabinets.

Preocupações do produto do cliente

Perimeter benches can trap residue at the wall junction and lose usable depth when service boxes are added to the work surface.

A square worktop-to-wall corner retains liquid and cleaning residue.The formed coved backsplash creates a continuous wipe path behind the equipment zone.

Surface-mounted outlet boxes consume work depth and catch containers.Covered connections sit in a narrow raised rear rail beyond the primary work area.

Full base cabinets block access to the floor and wall edge.Open C-frame supports preserve clear knee space and an unobstructed cleaning route.

Long bench runs develop misaligned seams that catch wipes and small components.Registered splice plates align neighbouring worktops and hold a narrow sealed joint.

Aplicações típicas

Cleanroom perimeter preparationLaboratory instrument supportSample receipt and documentationConsumable stagingNon-hazardous wet-process support

Parâmetros técnicos

Typical configurable specifications for a cleanroom laboratory wall bench are listed below.

Material principal	Type 304 stainless steel work surface and coved backsplash on sealed powder-coated steel C-frames
Painel de espessura	1.2–1.5 mm stainless worktop and backsplash assembly
Largura efetiva	600–900 mm work surface depth
Comprimento máximo	3600 mm per continuous bench run
Aço enfrentando espessura	1.2–1.5 mm Type 304 stainless steel work surface
Densidade Core	7900 - 8000 kg / m3 para aço inoxidável tipo 304
Condutividade térmica	14–16 W/(m·K) for Type 304 stainless steel
Superfície acabado	Brushed stainless steel work surface with light-gray or blue-gray cleanroom powder-coated frame
Tipo conjunto	Coved rear upstand with sealed service rail and registered inter-bench splice plates
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Covered power data or utility railUpper wall-mounted shelvesStainless under-bench drawersEquipment cut-outs or raised marine edge

Planning a Cleanroom Laboratory Wall Bench specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe