Single-sided cleanroom laboratory wall bench with coved backsplash

Reinraummöbel und Produkte aus Edelstahl

Reinraum Labor Wall Bench

A single-sided perimeter bench with a coved stainless backsplash and enclosed rear services for clean work along a laboratory wall.

Coved rear backsplash
Enclosed wall-side services
Clear knee and floor space
Modular length configuration

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The cleanroom laboratory wall bench provides a continuous stainless work surface for perimeter operations while shielding the wall junction from routine spills and residue. Its coved backsplash rises into a slim sealed service rail with covered power and data points above the rear edge. An open powder-coated support frame preserves operator knee space and allows cleaning beneath the full run. Joined bench modules use aligned worktop seams and removable rear covers so services remain reachable from the room side.

Key Features

A coved stainless transition removes the sharp internal corner between worktop and backsplash.

A narrow raised rail keeps covered utilities behind equipment rather than within the active work area.

Open C-frame supports leave knee space clear and expose the floor-wall edge for cleaning.

Aligned modular sections extend the bench run without adding enclosed base cabinets.

Kunden Produktbedenken

Perimeter benches can trap residue at the wall junction and lose usable depth when service boxes are added to the work surface.

A square worktop-to-wall corner retains liquid and cleaning residue.The formed coved backsplash creates a continuous wipe path behind the equipment zone.

Surface-mounted outlet boxes consume work depth and catch containers.Covered connections sit in a narrow raised rear rail beyond the primary work area.

Full base cabinets block access to the floor and wall edge.Open C-frame supports preserve clear knee space and an unobstructed cleaning route.

Long bench runs develop misaligned seams that catch wipes and small components.Registered splice plates align neighbouring worktops and hold a narrow sealed joint.

Typische Anwendungen

Cleanroom perimeter preparationLaboratory instrument supportSample receipt and documentationConsumable stagingNon-hazardous wet-process support

Technische Parameter

Typical configurable specifications for a cleanroom laboratory wall bench are listed below.

Core Material	Type 304 stainless steel work surface and coved backsplash on sealed powder-coated steel C-frames
Panel Dicke	1.2–1.5 mm stainless worktop and backsplash assembly
Effektive Breite	600–900 mm work surface depth
Maximale Länge	3600 mm per continuous bench run
Stahl facing Dicke	1.2–1.5 mm Type 304 stainless steel work surface
Kerndichte	7900 - 8000 kg / m3 für Edelstahl Typ 304
Thermische Leitfähigkeit	14–16 W/(m·K) for Type 304 stainless steel
Oberfläche Finish	Brushed stainless steel work surface with light-gray or blue-gray cleanroom powder-coated frame
Gemeinsamer Typ	Coved rear upstand with sealed service rail and registered inter-bench splice plates
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Covered power data or utility railUpper wall-mounted shelvesStainless under-bench drawersEquipment cut-outs or raised marine edge

Planning a Cleanroom Laboratory Wall Bench specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team