Single-sided cleanroom laboratory wall bench with coved backsplash

Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri

Temiz Oda Laboratuvar Duvar Bench

A single-sided perimeter bench with a coved stainless backsplash and enclosed rear services for clean work along a laboratory wall.

Coved rear backsplash
Enclosed wall-side services
Clear knee and floor space
Modular length configuration

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom laboratory wall bench provides a continuous stainless work surface for perimeter operations while shielding the wall junction from routine spills and residue. Its coved backsplash rises into a slim sealed service rail with covered power and data points above the rear edge. An open powder-coated support frame preserves operator knee space and allows cleaning beneath the full run. Joined bench modules use aligned worktop seams and removable rear covers so services remain reachable from the room side.

Ana Özellikler

A coved stainless transition removes the sharp internal corner between worktop and backsplash.

A narrow raised rail keeps covered utilities behind equipment rather than within the active work area.

Open C-frame supports leave knee space clear and expose the floor-wall edge for cleaning.

Aligned modular sections extend the bench run without adding enclosed base cabinets.

Müşteri Ürün Sorunları

Perimeter benches can trap residue at the wall junction and lose usable depth when service boxes are added to the work surface.

A square worktop-to-wall corner retains liquid and cleaning residue.The formed coved backsplash creates a continuous wipe path behind the equipment zone.

Surface-mounted outlet boxes consume work depth and catch containers.Covered connections sit in a narrow raised rear rail beyond the primary work area.

Full base cabinets block access to the floor and wall edge.Open C-frame supports preserve clear knee space and an unobstructed cleaning route.

Long bench runs develop misaligned seams that catch wipes and small components.Registered splice plates align neighbouring worktops and hold a narrow sealed joint.

Tipik uygulamalar

Cleanroom perimeter preparationLaboratory instrument supportSample receipt and documentationConsumable stagingNon-hazardous wet-process support

Teknik parametreler

Typical configurable specifications for a cleanroom laboratory wall bench are listed below.

Temel malzemeler	Type 304 stainless steel work surface and coved backsplash on sealed powder-coated steel C-frames
Panel kalınlığı	1.2–1.5 mm stainless worktop and backsplash assembly
Effective Width (Etkili Genişlik)	600–900 mm work surface depth
Maksimum uzunluk	3600 mm per continuous bench run
Çelik yüz yüze kalınlığı	1.2–1.5 mm Type 304 stainless steel work surface
Core Density (Çekirdek Yoğunluğu)	7900-8000 kg / m3 Tip 304 paslanmaz çelik için
Termal İletkenlik	14–16 W/(m·K) for Type 304 stainless steel
Yüzey bitirme	Brushed stainless steel work surface with light-gray or blue-gray cleanroom powder-coated frame
Ortak tip	Coved rear upstand with sealed service rail and registered inter-bench splice plates
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Covered power data or utility railUpper wall-mounted shelvesStainless under-bench drawersEquipment cut-outs or raised marine edge

Planning a Cleanroom Laboratory Wall Bench specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun