English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
غرفة نظيفة مختبر الجدار مقعد
A single-sided perimeter bench with a coved stainless backsplash and enclosed rear services for clean work along a laboratory wall.
- Coved rear backsplash
- Enclosed wall-side services
- Clear knee and floor space
- Modular length configuration
مقدمة المنتج
The cleanroom laboratory wall bench provides a continuous stainless work surface for perimeter operations while shielding the wall junction from routine spills and residue. Its coved backsplash rises into a slim sealed service rail with covered power and data points above the rear edge. An open powder-coated support frame preserves operator knee space and allows cleaning beneath the full run. Joined bench modules use aligned worktop seams and removable rear covers so services remain reachable from the room side.
الخصائص الرئيسية
A narrow raised rail keeps covered utilities behind equipment rather than within the active work area.
Open C-frame supports leave knee space clear and expose the floor-wall edge for cleaning.
Aligned modular sections extend the bench run without adding enclosed base cabinets.
مخاوف المنتج للعملاء
Perimeter benches can trap residue at the wall junction and lose usable depth when service boxes are added to the work surface.
A square worktop-to-wall corner retains liquid and cleaning residue.The formed coved backsplash creates a continuous wipe path behind the equipment zone.
Surface-mounted outlet boxes consume work depth and catch containers.Covered connections sit in a narrow raised rear rail beyond the primary work area.
Full base cabinets block access to the floor and wall edge.Open C-frame supports preserve clear knee space and an unobstructed cleaning route.
Long bench runs develop misaligned seams that catch wipes and small components.Registered splice plates align neighbouring worktops and hold a narrow sealed joint.
تطبيقات نموذجية
Cleanroom perimeter preparationLaboratory instrument supportSample receipt and documentationConsumable stagingNon-hazardous wet-process support
المعلمات الفنية
Typical configurable specifications for a cleanroom laboratory wall bench are listed below.
| المواد الأساسية | Type 304 stainless steel work surface and coved backsplash on sealed powder-coated steel C-frames |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless worktop and backsplash assembly |
| العرض الفعال | 600–900 mm work surface depth |
| الحد الأقصى الطول | 3600 mm per continuous bench run |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304 stainless steel work surface |
| الكثافة الأساسية | 7900-8000 كجم / م3 لنوع 304 الفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304 stainless steel |
| إنهاء السطح | Brushed stainless steel work surface with light-gray or blue-gray cleanroom powder-coated frame |
| نوع المشترك | Coved rear upstand with sealed service rail and registered inter-bench splice plates |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Covered power data or utility railUpper wall-mounted shelvesStainless under-bench drawersEquipment cut-outs or raised marine edge
Planning a Cleanroom Laboratory Wall Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
