Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Muebles de sala limpia y productos de acero inoxidable
Laboratorio de sala limpia Wall Bench
A single-sided perimeter bench with a coved stainless backsplash and enclosed rear services for clean work along a laboratory wall.
- Coved rear backsplash
- Enclosed wall-side services
- Clear knee and floor space
- Modular length configuration
Introducción del producto
The cleanroom laboratory wall bench provides a continuous stainless work surface for perimeter operations while shielding the wall junction from routine spills and residue. Its coved backsplash rises into a slim sealed service rail with covered power and data points above the rear edge. An open powder-coated support frame preserves operator knee space and allows cleaning beneath the full run. Joined bench modules use aligned worktop seams and removable rear covers so services remain reachable from the room side.
Características clave
A narrow raised rail keeps covered utilities behind equipment rather than within the active work area.
Open C-frame supports leave knee space clear and expose the floor-wall edge for cleaning.
Aligned modular sections extend the bench run without adding enclosed base cabinets.
Preocupaciones del producto del cliente
Perimeter benches can trap residue at the wall junction and lose usable depth when service boxes are added to the work surface.
A square worktop-to-wall corner retains liquid and cleaning residue.The formed coved backsplash creates a continuous wipe path behind the equipment zone.
Surface-mounted outlet boxes consume work depth and catch containers.Covered connections sit in a narrow raised rear rail beyond the primary work area.
Full base cabinets block access to the floor and wall edge.Open C-frame supports preserve clear knee space and an unobstructed cleaning route.
Long bench runs develop misaligned seams that catch wipes and small components.Registered splice plates align neighbouring worktops and hold a narrow sealed joint.
Aplicaciones típicas
Cleanroom perimeter preparationLaboratory instrument supportSample receipt and documentationConsumable stagingNon-hazardous wet-process support
Parámetros técnicos
Typical configurable specifications for a cleanroom laboratory wall bench are listed below.
| Materiales Core | Type 304 stainless steel work surface and coved backsplash on sealed powder-coated steel C-frames |
|---|---|
| Panel de espesor | 1.2–1.5 mm stainless worktop and backsplash assembly |
| Ancho efectivo | 600–900 mm work surface depth |
| Longitud máxima | 3600 mm per continuous bench run |
| Acero frente a espesor | 1.2–1.5 mm Type 304 stainless steel work surface |
| Densidad Core | 7900 - 8000 kg / m3 para acero inoxidable tipo 304 |
| Conductividad térmica | 14–16 W/(m·K) for Type 304 stainless steel |
| Superficie acabada | Brushed stainless steel work surface with light-gray or blue-gray cleanroom powder-coated frame |
| Tipo conjunto | Coved rear upstand with sealed service rail and registered inter-bench splice plates |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Covered power data or utility railUpper wall-mounted shelvesStainless under-bench drawersEquipment cut-outs or raised marine edge
Planning a Cleanroom Laboratory Wall Bench specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
