Stainless cleanroom garment drying cabinet with warm-air controls

Móveis de sala limpa e produtos de aço inoxidável

Z Gabinete de secagem de vestuário de sala limpa

A non-tumbling Type 304L stainless cabinet that circulates filtered warm air around hanging cleanroom garments and footwear after controlled laundering.

Gentle non-tumbling warm-air drying
Full-width garment rail and shoe rack
Removable intake filter and drip tray
Timer control with high-limit protection

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom garment drying cabinet uses a bottom-mounted blower and electric heating assembly to move filtered warm air upward through a perforated shoe rack and around garments suspended from a full-width stainless rail. Moist air leaves through a 100 mm roof exhaust connection instead of condensing on the enclosure walls. The Type 304L stainless body is permanently welded, closed on three sides and finished with a sloped hygienic roof. Twin gasketed doors isolate the load during operation, while a removable intake filter and drip tray can be reached from the lower service zone without dismantling the hanging section.

Características-chave

Upward warm-air circulation dries coveralls without the repeated bending and abrasion created by a rotating drum.

A perforated lower rack supports shoes and gloves while leaving the main hanging length available for one-piece garments.

The roof exhaust collar gives humid discharge air a defined path rather than releasing it through door gaps.

A front cycle timer, run indicator and independent temperature limiter keep the drying controls visible outside the wet load area.

Preocupações do produto do cliente

Clean garments need to dry evenly without tumbling damage, retained cabinet moisture or contact between footwear and long apparel.

Air-dried coveralls remain damp in folds where garments hang closely together.A forced upward airflow path passes filtered warm air around spaced hangers and through the lower perforated rack.

Tumble drying can abrade closures, elastic cuffs and coated textile surfaces.Stationary rail drying removes mechanical tumbling while keeping garments suspended in their natural shape.

Wet footwear placed below garments leaves water on the cabinet floor.A perforated shoe rack and removable drip tray separate footwear and collect drainage at the serviceable lower level.

Moist exhaust air condenses inside closed storage cupboards.The dedicated roof outlet directs humid process air away from the insulated door seals and interior panels.

Aplicações típicas

Cleanroom laundry return areasPharmaceutical gowning support roomsMedical-device reusable apparel dryingLaboratory coat preparation areasHygienic production workwear rooms

Parâmetros técnicos

Typical configurable specifications for a stainless warm-air cleanroom garment drying cabinet are listed below.

Material principal	Type 304L stainless steel welded enclosure with filtered warm-air blower, electric heater, hanger rail, perforated shoe rack and removable drip tray
Painel de espessura	1.2–1.5 mm enclosure panels, doors and internal air-distribution parts
Largura efetiva	1000 mm overall cabinet width
Comprimento máximo	2100 mm maximum overall height including the roof exhaust collar
Aço enfrentando espessura	1.2–1.5 mm Type 304L stainless outer body, doors and interior liner
Densidade Core	7900 - 8000 kg / m3 para aço inoxidável tipo 304L
Condutividade térmica	14 - 16 W / (m · K) para aço inoxidável tipo 304L
Superfície acabado	Brushed 320-grit stainless exterior with smooth stainless interior, blue silicone door seals and blue control plate
Tipo conjunto	Continuously welded carcass with gasketed twin doors, sealed lower blower plenum, perforated distribution rack and 100 mm roof exhaust spigot
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Ambient-air or heated-air drying modesAdditional glove and boot drying attachmentsHEPA intake filtration moduleType 316L electropolished interior

Planning a Cleanroom Garment Drying Cabinet specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe