Cleanroom ตู้อบแห้งเสื้อผ้า
- Gentle non-tumbling warm-air drying
- Full-width garment rail and shoe rack
- Removable intake filter and drip tray
- Timer control with high-limit protection
การแนะนําสินค้า
The cleanroom garment drying cabinet uses a bottom-mounted blower and electric heating assembly to move filtered warm air upward through a perforated shoe rack and around garments suspended from a full-width stainless rail. Moist air leaves through a 100 mm roof exhaust connection instead of condensing on the enclosure walls. The Type 304L stainless body is permanently welded, closed on three sides and finished with a sloped hygienic roof. Twin gasketed doors isolate the load during operation, while a removable intake filter and drip tray can be reached from the lower service zone without dismantling the hanging section.
คุณสมบัติที่สําคัญ
A perforated lower rack supports shoes and gloves while leaving the main hanging length available for one-piece garments.
The roof exhaust collar gives humid discharge air a defined path rather than releasing it through door gaps.
A front cycle timer, run indicator and independent temperature limiter keep the drying controls visible outside the wet load area.
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
Clean garments need to dry evenly without tumbling damage, retained cabinet moisture or contact between footwear and long apparel.
การใช้งานทั่วไป
พารามิเตอร์ทางเทคนิค
Typical configurable specifications for a stainless warm-air cleanroom garment drying cabinet are listed below.
| วัสดุหลัก | Type 304L stainless steel welded enclosure with filtered warm-air blower, electric heater, hanger rail, perforated shoe rack and removable drip tray |
|---|---|
| ความหนาของแผง | 1.2–1.5 mm enclosure panels, doors and internal air-distribution parts |
| ความกว้างที่มีประสิทธิภาพ | 1000 mm overall cabinet width |
| ความยาวสูงสุด | 2100 mm maximum overall height including the roof exhaust collar |
| ความหนาของเหล็กหันหน้า | 1.2–1.5 mm Type 304L stainless outer body, doors and interior liner |
| ความหนาแน่นหลัก | 7900–8000 kg/m³ for Type 304L stainless steel |
| การนําความร้อน | 14–16 W/(m·K) for Type 304L stainless steel |
| เสร็จสิ้นพื้นผิว | Brushed 320-grit stainless exterior with smooth stainless interior, blue silicone door seals and blue control plate |
| ประเภทร่วม | Continuously welded carcass with gasketed twin doors, sealed lower blower plenum, perforated distribution rack and 100 mm roof exhaust spigot |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Planning a Cleanroom Garment Drying Cabinet specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม