Kabinet Pengeringan Garment Cleanroom
- Gentle non-tumbling warm-air drying
- Full-width garment rail and shoe rack
- Removable intake filter and drip tray
- Timer control with high-limit protection
Perkenalan produk
The cleanroom garment drying cabinet uses a bottom-mounted blower and electric heating assembly to move filtered warm air upward through a perforated shoe rack and around garments suspended from a full-width stainless rail. Moist air leaves through a 100 mm roof exhaust connection instead of condensing on the enclosure walls. The Type 304L stainless body is permanently welded, closed on three sides and finished with a sloped hygienic roof. Twin gasketed doors isolate the load during operation, while a removable intake filter and drip tray can be reached from the lower service zone without dismantling the hanging section.
Fitur utama:
A perforated lower rack supports shoes and gloves while leaving the main hanging length available for one-piece garments.
The roof exhaust collar gives humid discharge air a defined path rather than releasing it through door gaps.
A front cycle timer, run indicator and independent temperature limiter keep the drying controls visible outside the wet load area.
Kekhawatiran produk pelanggan
Clean garments need to dry evenly without tumbling damage, retained cabinet moisture or contact between footwear and long apparel.
Aplikasi yang Tipis
Parameter teknis
Typical configurable specifications for a stainless warm-air cleanroom garment drying cabinet are listed below.
| Bahan inti | Type 304L stainless steel welded enclosure with filtered warm-air blower, electric heater, hanger rail, perforated shoe rack and removable drip tray |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.2–1.5 mm enclosure panels, doors and internal air-distribution parts |
| Efektif lebar | 1000 mm overall cabinet width |
| Panjang maksimum | 2100 mm maximum overall height including the roof exhaust collar |
| Baja menghadap ketebalan | 1.2–1.5 mm Type 304L stainless outer body, doors and interior liner |
| Kepadatan inti (core density) | 7900 - 8000 kg / m3 untuk baja tahan karat Tipe 304L |
| Konduktivitas Termal (Thermal Conductivity) | 14 - 16 W / (m · K) untuk baja tahan karat Tipe 304L |
| Permukaan selesai | Brushed 320-grit stainless exterior with smooth stainless interior, blue silicone door seals and blue control plate |
| Jenis Bersama | Continuously welded carcass with gasketed twin doors, sealed lower blower plenum, perforated distribution rack and 100 mm roof exhaust spigot |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Planning a Cleanroom Garment Drying Cabinet specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam