Stainless cleanroom garment drying cabinet with warm-air controls

Perabot bilik bersih dan produk keluli tahan karat

Kabinet Pengeringan Pakaian Bilik Bersih

A non-tumbling Type 304L stainless cabinet that circulates filtered warm air around hanging cleanroom garments and footwear after controlled laundering.

Gentle non-tumbling warm-air drying
Full-width garment rail and shoe rack
Removable intake filter and drip tray
Timer control with high-limit protection

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom garment drying cabinet uses a bottom-mounted blower and electric heating assembly to move filtered warm air upward through a perforated shoe rack and around garments suspended from a full-width stainless rail. Moist air leaves through a 100 mm roof exhaust connection instead of condensing on the enclosure walls. The Type 304L stainless body is permanently welded, closed on three sides and finished with a sloped hygienic roof. Twin gasketed doors isolate the load during operation, while a removable intake filter and drip tray can be reached from the lower service zone without dismantling the hanging section.

Ciri-ciri Utama

Upward warm-air circulation dries coveralls without the repeated bending and abrasion created by a rotating drum.

A perforated lower rack supports shoes and gloves while leaving the main hanging length available for one-piece garments.

The roof exhaust collar gives humid discharge air a defined path rather than releasing it through door gaps.

A front cycle timer, run indicator and independent temperature limiter keep the drying controls visible outside the wet load area.

Kebimbangan Produk Pelanggan

Clean garments need to dry evenly without tumbling damage, retained cabinet moisture or contact between footwear and long apparel.

Air-dried coveralls remain damp in folds where garments hang closely together.A forced upward airflow path passes filtered warm air around spaced hangers and through the lower perforated rack.

Tumble drying can abrade closures, elastic cuffs and coated textile surfaces.Stationary rail drying removes mechanical tumbling while keeping garments suspended in their natural shape.

Wet footwear placed below garments leaves water on the cabinet floor.A perforated shoe rack and removable drip tray separate footwear and collect drainage at the serviceable lower level.

Moist exhaust air condenses inside closed storage cupboards.The dedicated roof outlet directs humid process air away from the insulated door seals and interior panels.

Permohonan yang biasa

Cleanroom laundry return areasPharmaceutical gowning support roomsMedical-device reusable apparel dryingLaboratory coat preparation areasHygienic production workwear rooms

Parameter teknikal

Typical configurable specifications for a stainless warm-air cleanroom garment drying cabinet are listed below.

Bahan Teras	Type 304L stainless steel welded enclosure with filtered warm-air blower, electric heater, hanger rail, perforated shoe rack and removable drip tray
Ketebalan Panel	1.2–1.5 mm enclosure panels, doors and internal air-distribution parts
Lebar berkesan	1000 mm lebar kabinet keseluruhan
Panjang maksimum	2100 mm maximum overall height including the roof exhaust collar
Keluli Menghadapi Ketebalan	1.2–1.5 mm Type 304L stainless outer body, doors and interior liner
Ketumpatan teras	7900-8000 kg / m3 untuk keluli tahan karat Jenis 304L
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat Jenis 304L
Kemasan permukaan	Brushed 320-grit stainless exterior with smooth stainless interior, blue silicone door seals and blue control plate
Jenis Bersatu	Continuously welded carcass with gasketed twin doors, sealed lower blower plenum, perforated distribution rack and 100 mm roof exhaust spigot
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Ambient-air or heated-air drying modesAdditional glove and boot drying attachmentsHEPA intake filtration moduleType 316L electropolished interior

Planning a Cleanroom Garment Drying Cabinet specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami