English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
Cleanroom مجلس الوزراء تجفيف الملابس
A non-tumbling Type 304L stainless cabinet that circulates filtered warm air around hanging cleanroom garments and footwear after controlled laundering.
- Gentle non-tumbling warm-air drying
- Full-width garment rail and shoe rack
- Removable intake filter and drip tray
- Timer control with high-limit protection
مقدمة المنتج
The cleanroom garment drying cabinet uses a bottom-mounted blower and electric heating assembly to move filtered warm air upward through a perforated shoe rack and around garments suspended from a full-width stainless rail. Moist air leaves through a 100 mm roof exhaust connection instead of condensing on the enclosure walls. The Type 304L stainless body is permanently welded, closed on three sides and finished with a sloped hygienic roof. Twin gasketed doors isolate the load during operation, while a removable intake filter and drip tray can be reached from the lower service zone without dismantling the hanging section.
الخصائص الرئيسية
A perforated lower rack supports shoes and gloves while leaving the main hanging length available for one-piece garments.
The roof exhaust collar gives humid discharge air a defined path rather than releasing it through door gaps.
A front cycle timer, run indicator and independent temperature limiter keep the drying controls visible outside the wet load area.
مخاوف المنتج للعملاء
Clean garments need to dry evenly without tumbling damage, retained cabinet moisture or contact between footwear and long apparel.
Air-dried coveralls remain damp in folds where garments hang closely together.A forced upward airflow path passes filtered warm air around spaced hangers and through the lower perforated rack.
Tumble drying can abrade closures, elastic cuffs and coated textile surfaces.Stationary rail drying removes mechanical tumbling while keeping garments suspended in their natural shape.
Wet footwear placed below garments leaves water on the cabinet floor.A perforated shoe rack and removable drip tray separate footwear and collect drainage at the serviceable lower level.
Moist exhaust air condenses inside closed storage cupboards.The dedicated roof outlet directs humid process air away from the insulated door seals and interior panels.
تطبيقات نموذجية
Cleanroom laundry return areasPharmaceutical gowning support roomsMedical-device reusable apparel dryingLaboratory coat preparation areasHygienic production workwear rooms
المعلمات الفنية
Typical configurable specifications for a stainless warm-air cleanroom garment drying cabinet are listed below.
| المواد الأساسية | Type 304L stainless steel welded enclosure with filtered warm-air blower, electric heater, hanger rail, perforated shoe rack and removable drip tray |
|---|---|
| سمك اللوحة | 1.2–1.5 mm enclosure panels, doors and internal air-distribution parts |
| العرض الفعال | 1000 mm overall cabinet width |
| الحد الأقصى الطول | 2100 mm maximum overall height including the roof exhaust collar |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304L stainless outer body, doors and interior liner |
| الكثافة الأساسية | 7900–8000 kg/m³ for Type 304L stainless steel |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304L stainless steel |
| إنهاء السطح | Brushed 320-grit stainless exterior with smooth stainless interior, blue silicone door seals and blue control plate |
| نوع المشترك | Continuously welded carcass with gasketed twin doors, sealed lower blower plenum, perforated distribution rack and 100 mm roof exhaust spigot |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Ambient-air or heated-air drying modesAdditional glove and boot drying attachmentsHEPA intake filtration moduleType 316L electropolished interior
Planning a Cleanroom Garment Drying Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
