Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Cleanroom Ceiling Suspension Rod
A galvanized threaded steel hanger used to suspend and level cleanroom ceiling grids from the overhead building structure.
- Continuous threaded height adjustment
- M8 and M10 diameter options
- Compatible with couplers and turnbuckles
- Galvanized corrosion-resistant finish
Introdução do produto
The Cleanroom Ceiling Suspension Rod transfers the ceiling-grid load to a structurally rated overhead support while providing fine vertical adjustment. Its continuous metric thread accepts nuts, coupling sleeves, turnbuckles and purpose-designed grid clips, making it suitable for both short drops and extended hanger assemblies. Zinc protection is used for typical dry ceiling voids, with stainless steel available where a higher level of corrosion resistance is required.
Características-chave
Coupling nuts can join rod sections where a longer suspension drop is needed.
Standard metric sizes match widely used cleanroom grid hardware.
A zinc-coated surface protects carbon steel during indoor service.
Compact hardware leaves working space for ducts, filters and utilities above the ceiling.
Preocupações do produto do cliente
Suspended cleanroom ceilings depend on many small hanger points, so adjustability, hardware compatibility and resistance to loosening are essential.
Fixed-length hangers make it hard to compensate for an uneven overhead slab.Continuous threads provide controlled vertical adjustment at each suspension point.
Long ceiling drops can exceed the practical length of a single rod.Threaded coupling sleeves connect compatible rod sections into a continuous hanger assembly.
Mismatched hanger hardware slows ceiling-grid assembly.Standard M8 and M10 formats pair with common nuts, turnbuckles and cleanroom grid clips.
Untreated steel can corrode in a ceiling void and stain adjacent components.Zinc-coated carbon steel or optional stainless steel provides a more durable exposed surface.
Aplicações típicas
Suspended cleanroom ceiling gridsWalkable ceiling support frameworksFilter and light support modulesLaboratory ceiling systemsControlled-environment service ceilings
Parâmetros técnicos
Rod diameter, drop length and connection hardware are selected for the ceiling support arrangement. Panel-only properties are identified as not applicable because this product is a solid steel hanger.
| Material principal | M8 or M10 galvanized carbon-steel threaded rod |
|---|---|
| Painel de espessura | N/A — not applicable to a threaded suspension rod |
| Largura efetiva | N/A — specified by 8 or 10 mm nominal rod diameter |
| Comprimento máximo | 3000 mm standard full-length rod |
| Aço enfrentando espessura | N/A — the component is solid steel rather than steel-faced paneling |
| Densidade Core | N/A — not applicable to a solid steel suspension component |
| Condutividade térmica | N/A — the rod is not used as thermal insulation |
| Superfície acabado | Zinc-plated or hot-dip galvanized; stainless steel optional |
| Tipo conjunto | Metric threaded connection with nuts, coupler or turnbuckle and ceiling-grid clip |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
M8 galvanized threaded rodM10 galvanized threaded rodStainless-steel threaded rodCoupler, turnbuckle and grid-clip hardware sets
Planning a Cleanroom Ceiling Suspension Rod specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
