Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Sala limpia Ceiling Suspension Rod
A galvanized threaded steel hanger used to suspend and level cleanroom ceiling grids from the overhead building structure.
- Continuous threaded height adjustment
- M8 and M10 diameter options
- Compatible with couplers and turnbuckles
- Galvanized corrosion-resistant finish
Introducción del producto
The Cleanroom Ceiling Suspension Rod transfers the ceiling-grid load to a structurally rated overhead support while providing fine vertical adjustment. Its continuous metric thread accepts nuts, coupling sleeves, turnbuckles and purpose-designed grid clips, making it suitable for both short drops and extended hanger assemblies. Zinc protection is used for typical dry ceiling voids, with stainless steel available where a higher level of corrosion resistance is required.
Características clave
Coupling nuts can join rod sections where a longer suspension drop is needed.
Standard metric sizes match widely used cleanroom grid hardware.
A zinc-coated surface protects carbon steel during indoor service.
Compact hardware leaves working space for ducts, filters and utilities above the ceiling.
Preocupaciones del producto del cliente
Suspended cleanroom ceilings depend on many small hanger points, so adjustability, hardware compatibility and resistance to loosening are essential.
Fixed-length hangers make it hard to compensate for an uneven overhead slab.Continuous threads provide controlled vertical adjustment at each suspension point.
Long ceiling drops can exceed the practical length of a single rod.Threaded coupling sleeves connect compatible rod sections into a continuous hanger assembly.
Mismatched hanger hardware slows ceiling-grid assembly.Standard M8 and M10 formats pair with common nuts, turnbuckles and cleanroom grid clips.
Untreated steel can corrode in a ceiling void and stain adjacent components.Zinc-coated carbon steel or optional stainless steel provides a more durable exposed surface.
Aplicaciones típicas
Suspended cleanroom ceiling gridsWalkable ceiling support frameworksFilter and light support modulesLaboratory ceiling systemsControlled-environment service ceilings
Parámetros técnicos
Rod diameter, drop length and connection hardware are selected for the ceiling support arrangement. Panel-only properties are identified as not applicable because this product is a solid steel hanger.
| Materiales Core | M8 or M10 galvanized carbon-steel threaded rod |
|---|---|
| Panel de espesor | N/A — not applicable to a threaded suspension rod |
| Ancho efectivo | N/A — specified by 8 or 10 mm nominal rod diameter |
| Longitud máxima | 3000 mm standard full-length rod |
| Acero frente a espesor | N/A — the component is solid steel rather than steel-faced paneling |
| Densidad Core | N/A — not applicable to a solid steel suspension component |
| Conductividad térmica | N/A — the rod is not used as thermal insulation |
| Superficie acabada | Zinc-plated or hot-dip galvanized; stainless steel optional |
| Tipo conjunto | Metric threaded connection with nuts, coupler or turnbuckle and ceiling-grid clip |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
M8 galvanized threaded rodM10 galvanized threaded rodStainless-steel threaded rodCoupler, turnbuckle and grid-clip hardware sets
Planning a Cleanroom Ceiling Suspension Rod specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
