日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
クリーンルームの壁と天井システム
クリーンルームの天井懸濁液の棒
A galvanized threaded steel hanger used to suspend and level cleanroom ceiling grids from the overhead building structure.
- Continuous threaded height adjustment
- M8 and M10 diameter options
- Compatible with couplers and turnbuckles
- Galvanized corrosion-resistant finish
商品紹介
The Cleanroom Ceiling Suspension Rod transfers the ceiling-grid load to a structurally rated overhead support while providing fine vertical adjustment. Its continuous metric thread accepts nuts, coupling sleeves, turnbuckles and purpose-designed grid clips, making it suitable for both short drops and extended hanger assemblies. Zinc protection is used for typical dry ceiling voids, with stainless steel available where a higher level of corrosion resistance is required.
主要な特徴
Coupling nuts can join rod sections where a longer suspension drop is needed.
Standard metric sizes match widely used cleanroom grid hardware.
A zinc-coated surface protects carbon steel during indoor service.
Compact hardware leaves working space for ducts, filters and utilities above the ceiling.
お客様の製品に関する懸念事項
Suspended cleanroom ceilings depend on many small hanger points, so adjustability, hardware compatibility and resistance to loosening are essential.
Fixed-length hangers make it hard to compensate for an uneven overhead slab.Continuous threads provide controlled vertical adjustment at each suspension point.
Long ceiling drops can exceed the practical length of a single rod.Threaded coupling sleeves connect compatible rod sections into a continuous hanger assembly.
Mismatched hanger hardware slows ceiling-grid assembly.Standard M8 and M10 formats pair with common nuts, turnbuckles and cleanroom grid clips.
Untreated steel can corrode in a ceiling void and stain adjacent components.Zinc-coated carbon steel or optional stainless steel provides a more durable exposed surface.
典型的な用途
Suspended cleanroom ceiling gridsWalkable ceiling support frameworksFilter and light support modulesLaboratory ceiling systemsControlled-environment service ceilings
技術的なパラメータ
Rod diameter, drop length and connection hardware are selected for the ceiling support arrangement. Panel-only properties are identified as not applicable because this product is a solid steel hanger.
| コア材料 | M8 or M10 galvanized carbon-steel threaded rod |
|---|---|
| パネルの厚さ | N/A — not applicable to a threaded suspension rod |
| 有効幅 | N/A — specified by 8 or 10 mm nominal rod diameter |
| 最大長さ | 3000 mm standard full-length rod |
| 鋼鉄の厚さを直面する | N/A — the component is solid steel rather than steel-faced paneling |
| コア密度 | N/A — not applicable to a solid steel suspension component |
| 熱伝導率 | N/A — the rod is not used as thermal insulation |
| 表面仕上げ | Zinc-plated or hot-dip galvanized; stainless steel optional |
| ジョイントタイプ | Metric threaded connection with nuts, coupler or turnbuckle and ceiling-grid clip |
| カスタマイズ | 目的のアプリケーションおよび動作環境に基づいて利用可能 |
利用可能なオプション
M8 galvanized threaded rodM10 galvanized threaded rodStainless-steel threaded rodCoupler, turnbuckle and grid-clip hardware sets
Planning a Cleanroom Ceiling Suspension Rod specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
