English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Подвесный стерж для потолка чистой комнаты
A galvanized threaded steel hanger used to suspend and level cleanroom ceiling grids from the overhead building structure.
- Continuous threaded height adjustment
- M8 and M10 diameter options
- Compatible with couplers and turnbuckles
- Galvanized corrosion-resistant finish
Введение продукции
The Cleanroom Ceiling Suspension Rod transfers the ceiling-grid load to a structurally rated overhead support while providing fine vertical adjustment. Its continuous metric thread accepts nuts, coupling sleeves, turnbuckles and purpose-designed grid clips, making it suitable for both short drops and extended hanger assemblies. Zinc protection is used for typical dry ceiling voids, with stainless steel available where a higher level of corrosion resistance is required.
Основные характеристики
Coupling nuts can join rod sections where a longer suspension drop is needed.
Standard metric sizes match widely used cleanroom grid hardware.
A zinc-coated surface protects carbon steel during indoor service.
Compact hardware leaves working space for ducts, filters and utilities above the ceiling.
Обеспокоенность клиентов продуктами
Suspended cleanroom ceilings depend on many small hanger points, so adjustability, hardware compatibility and resistance to loosening are essential.
Fixed-length hangers make it hard to compensate for an uneven overhead slab.Continuous threads provide controlled vertical adjustment at each suspension point.
Long ceiling drops can exceed the practical length of a single rod.Threaded coupling sleeves connect compatible rod sections into a continuous hanger assembly.
Mismatched hanger hardware slows ceiling-grid assembly.Standard M8 and M10 formats pair with common nuts, turnbuckles and cleanroom grid clips.
Untreated steel can corrode in a ceiling void and stain adjacent components.Zinc-coated carbon steel or optional stainless steel provides a more durable exposed surface.
Типичные приложения
Suspended cleanroom ceiling gridsWalkable ceiling support frameworksFilter and light support modulesLaboratory ceiling systemsControlled-environment service ceilings
Технические параметры
Rod diameter, drop length and connection hardware are selected for the ceiling support arrangement. Panel-only properties are identified as not applicable because this product is a solid steel hanger.
| Основной материал | M8 or M10 galvanized carbon-steel threaded rod |
|---|---|
| Толщина панели | N/A — not applicable to a threaded suspension rod |
| эффективная ширина | N/A — specified by 8 or 10 mm nominal rod diameter |
| Максимальная длина | 3000 mm standard full-length rod |
| Толщина линий стали | N/A — the component is solid steel rather than steel-faced paneling |
| Плотность ядра | N/A — not applicable to a solid steel suspension component |
| Теплопроводимость | N/A — the rod is not used as thermal insulation |
| Поверхностная отделка | Zinc-plated or hot-dip galvanized; stainless steel optional |
| Объединенный тип | Metric threaded connection with nuts, coupler or turnbuckle and ceiling-grid clip |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
M8 galvanized threaded rodM10 galvanized threaded rodStainless-steel threaded rodCoupler, turnbuckle and grid-clip hardware sets
Planning a Cleanroom Ceiling Suspension Rod specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
