Cleanroom ceiling suspension rod with threaded fittings on a light gray background

클린룸 벽 및 천장 시스템

클린룸 천장 Suspension Rod

A galvanized threaded steel hanger used to suspend and level cleanroom ceiling grids from the overhead building structure.

Continuous threaded height adjustment
M8 and M10 diameter options
Compatible with couplers and turnbuckles
Galvanized corrosion-resistant finish

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Ceiling Suspension Rod transfers the ceiling-grid load to a structurally rated overhead support while providing fine vertical adjustment. Its continuous metric thread accepts nuts, coupling sleeves, turnbuckles and purpose-designed grid clips, making it suitable for both short drops and extended hanger assemblies. Zinc protection is used for typical dry ceiling voids, with stainless steel available where a higher level of corrosion resistance is required.

주요 기능

Full-length threading permits precise ceiling elevation adjustment.

Coupling nuts can join rod sections where a longer suspension drop is needed.

Standard metric sizes match widely used cleanroom grid hardware.

A zinc-coated surface protects carbon steel during indoor service.

Compact hardware leaves working space for ducts, filters and utilities above the ceiling.

고객 제품 관심사

Suspended cleanroom ceilings depend on many small hanger points, so adjustability, hardware compatibility and resistance to loosening are essential.

Fixed-length hangers make it hard to compensate for an uneven overhead slab.Continuous threads provide controlled vertical adjustment at each suspension point.

Long ceiling drops can exceed the practical length of a single rod.Threaded coupling sleeves connect compatible rod sections into a continuous hanger assembly.

Mismatched hanger hardware slows ceiling-grid assembly.Standard M8 and M10 formats pair with common nuts, turnbuckles and cleanroom grid clips.

Untreated steel can corrode in a ceiling void and stain adjacent components.Zinc-coated carbon steel or optional stainless steel provides a more durable exposed surface.

일반적인 응용 프로그램

Suspended cleanroom ceiling gridsWalkable ceiling support frameworksFilter and light support modulesLaboratory ceiling systemsControlled-environment service ceilings

기술 매개변수

Rod diameter, drop length and connection hardware are selected for the ceiling support arrangement. Panel-only properties are identified as not applicable because this product is a solid steel hanger.

핵심 재료	M8 or M10 galvanized carbon-steel threaded rod
패널 두께	N/A — not applicable to a threaded suspension rod
유효 폭	N/A — specified by 8 or 10 mm nominal rod diameter
최대 길이	3000 mm standard full-length rod
강철 면면 두께	N/A — the component is solid steel rather than steel-faced paneling
코어 밀도	N/A — not applicable to a solid steel suspension component
열전도도 (Thermal Conductivity)	N/A — the rod is not used as thermal insulation
표면 마무리	Zinc-plated or hot-dip galvanized; stainless steel optional
접합 유형	Metric threaded connection with nuts, coupler or turnbuckle and ceiling-grid clip
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

M8 galvanized threaded rodM10 galvanized threaded rodStainless-steel threaded rodCoupler, turnbuckle and grid-clip hardware sets

Planning a Cleanroom Ceiling Suspension Rod specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.