Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Utilidade de Cleanroom
Sistema de limpeza no local
A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.
- Automated recipe-controlled cleaning
- Three segregated solution tanks
- Heated sanitary circulation loop
Introdução do produto
The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.
Características-chave
Sanitary centrifugal circulation pump
Plate heat exchanger heating
Automated valve manifold
Temperature and conductivity monitoring
Recipe-based sequencing
Detergent recovery routing
Integrated HMI control
Preocupações do produto do cliente
Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.
Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.
Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.
Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.
Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.
Aplicações típicas
Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines
Parâmetros técnicos
Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.
| Material principal | 316L stainless steel solution tanks and hygienic product-contact piping |
|---|---|
| Painel de espessura | Tank wall typically 2.0–5.0 mm |
| Largura efetiva | Skid width typically 1500–3500 mm |
| Comprimento máximo | Complete skid length typically up to 6000 mm |
| Aço enfrentando espessura | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Densidade Core | 316L stainless steel density approximately 8000 kg/m³ |
| Condutividade térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superfície acabado | Polished tank and piping interiors with satin external stainless finish |
| Tipo conjunto | Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management
Planning a Clean-in-Place System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
