Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Utility Systemen
Clean-in - Place-System
A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.
- Automated recipe-controlled cleaning
- Three segregated solution tanks
- Heated sanitary circulation loop
Produkteinführung
The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.
Key Features
Sanitary centrifugal circulation pump
Plate heat exchanger heating
Automated valve manifold
Temperature and conductivity monitoring
Recipe-based sequencing
Detergent recovery routing
Integrated HMI control
Kunden Produktbedenken
Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.
Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.
Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.
Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.
Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.
Typische Anwendungen
Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines
Technische Parameter
Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.
| Core Material | 316L stainless steel solution tanks and hygienic product-contact piping |
|---|---|
| Panel Dicke | Tank wall typically 2.0–5.0 mm |
| Effektive Breite | Skid width typically 1500–3500 mm |
| Maximale Länge | Complete skid length typically up to 6000 mm |
| Stahl facing Dicke | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Kerndichte | 316L stainless steel density approximately 8000 kg/m³ |
| Thermische Leitfähigkeit | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Oberfläche Finish | Polished tank and piping interiors with satin external stainless finish |
| Gemeinsamer Typ | Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management
Planning a Clean-in-Place System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
