İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hizmet Sistemi
Clean-in-Place Sistemleri
A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.
- Automated recipe-controlled cleaning
- Three segregated solution tanks
- Heated sanitary circulation loop
Ürün tanıtımı
The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.
Ana Özellikler
Sanitary centrifugal circulation pump
Plate heat exchanger heating
Automated valve manifold
Temperature and conductivity monitoring
Recipe-based sequencing
Detergent recovery routing
Integrated HMI control
Müşteri Ürün Sorunları
Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.
Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.
Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.
Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.
Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.
Tipik uygulamalar
Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines
Teknik parametreler
Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.
| Temel malzemeler | 316L stainless steel solution tanks and hygienic product-contact piping |
|---|---|
| Panel kalınlığı | Tank wall typically 2.0–5.0 mm |
| Effective Width (Etkili Genişlik) | Skid width typically 1500–3500 mm |
| Maksimum uzunluk | Complete skid length typically up to 6000 mm |
| Çelik yüz yüze kalınlığı | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Core Density (Çekirdek Yoğunluğu) | 316L stainless steel density approximately 8000 kg/m³ |
| Termal İletkenlik | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Yüzey bitirme | Polished tank and piping interiors with satin external stainless finish |
| Ortak tip | Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management
Planning a Clean-in-Place System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
