Clean-in-place system three-quarter view with three solution tanks

クリーンルームユーティリティシステム

クリーンインプレイスシステム

A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.

Automated recipe-controlled cleaning
Three segregated solution tanks
Heated sanitary circulation loop

見積もりリクエスト製品案内

商品紹介

The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.

主要な特徴

Three segregated stainless tanks

Sanitary centrifugal circulation pump

Plate heat exchanger heating

Automated valve manifold

Temperature and conductivity monitoring

Recipe-based sequencing

Detergent recovery routing

Integrated HMI control

お客様の製品に関する懸念事項

Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.

Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.

Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.

Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.

Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.

典型的な用途

Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines

技術的なパラメータ

Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.

コア材料	316L stainless steel solution tanks and hygienic product-contact piping
パネルの厚さ	Tank wall typically 2.0–5.0 mm
有効幅	Skid width typically 1500–3500 mm
最大長さ	Complete skid length typically up to 6000 mm
鋼鉄の厚さを直面する	Control enclosure and skid sheet typically 1.5–3.0 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Polished tank and piping interiors with satin external stainless finish
ジョイントタイプ	Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management

Planning a Clean-in-Place System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する